Merge remote-tracking branch 'qmk/master' into vial
This commit is contained in:
Ilya Zhuravlev
@@ -20,4 +20,6 @@
|
||||
#define STM32_LSECLK 32768U
|
||||
#define STM32_HSECLK 25000000U
|
||||
|
||||
#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
|
||||
#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
|
||||
# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
|
||||
#endif
|
||||
|
||||
@@ -1,714 +0,0 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file rt/templates/chconf.h
|
||||
* @brief Configuration file template.
|
||||
* @details A copy of this file must be placed in each project directory, it
|
||||
* contains the application specific kernel settings.
|
||||
*
|
||||
* @addtogroup config
|
||||
* @details Kernel related settings and hooks.
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef CHCONF_H
|
||||
#define CHCONF_H
|
||||
|
||||
#define _CHIBIOS_RT_CONF_
|
||||
#define _CHIBIOS_RT_CONF_VER_6_0_
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name System timers settings
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief System time counter resolution.
|
||||
* @note Allowed values are 16 or 32 bits.
|
||||
*/
|
||||
#if !defined(CH_CFG_ST_RESOLUTION)
|
||||
#define CH_CFG_ST_RESOLUTION 32
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief System tick frequency.
|
||||
* @details Frequency of the system timer that drives the system ticks. This
|
||||
* setting also defines the system tick time unit.
|
||||
*/
|
||||
#if !defined(CH_CFG_ST_FREQUENCY)
|
||||
#define CH_CFG_ST_FREQUENCY 10000
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Time intervals data size.
|
||||
* @note Allowed values are 16, 32 or 64 bits.
|
||||
*/
|
||||
#if !defined(CH_CFG_INTERVALS_SIZE)
|
||||
#define CH_CFG_INTERVALS_SIZE 32
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Time types data size.
|
||||
* @note Allowed values are 16 or 32 bits.
|
||||
*/
|
||||
#if !defined(CH_CFG_TIME_TYPES_SIZE)
|
||||
#define CH_CFG_TIME_TYPES_SIZE 32
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Time delta constant for the tick-less mode.
|
||||
* @note If this value is zero then the system uses the classic
|
||||
* periodic tick. This value represents the minimum number
|
||||
* of ticks that is safe to specify in a timeout directive.
|
||||
* The value one is not valid, timeouts are rounded up to
|
||||
* this value.
|
||||
*/
|
||||
#if !defined(CH_CFG_ST_TIMEDELTA)
|
||||
#define CH_CFG_ST_TIMEDELTA 2
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Kernel parameters and options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Round robin interval.
|
||||
* @details This constant is the number of system ticks allowed for the
|
||||
* threads before preemption occurs. Setting this value to zero
|
||||
* disables the preemption for threads with equal priority and the
|
||||
* round robin becomes cooperative. Note that higher priority
|
||||
* threads can still preempt, the kernel is always preemptive.
|
||||
* @note Disabling the round robin preemption makes the kernel more compact
|
||||
* and generally faster.
|
||||
* @note The round robin preemption is not supported in tickless mode and
|
||||
* must be set to zero in that case.
|
||||
*/
|
||||
#if !defined(CH_CFG_TIME_QUANTUM)
|
||||
#define CH_CFG_TIME_QUANTUM 0
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Managed RAM size.
|
||||
* @details Size of the RAM area to be managed by the OS. If set to zero
|
||||
* then the whole available RAM is used. The core memory is made
|
||||
* available to the heap allocator and/or can be used directly through
|
||||
* the simplified core memory allocator.
|
||||
*
|
||||
* @note In order to let the OS manage the whole RAM the linker script must
|
||||
* provide the @p __heap_base__ and @p __heap_end__ symbols.
|
||||
* @note Requires @p CH_CFG_USE_MEMCORE.
|
||||
*/
|
||||
#if !defined(CH_CFG_MEMCORE_SIZE)
|
||||
#define CH_CFG_MEMCORE_SIZE 0
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Idle thread automatic spawn suppression.
|
||||
* @details When this option is activated the function @p chSysInit()
|
||||
* does not spawn the idle thread. The application @p main()
|
||||
* function becomes the idle thread and must implement an
|
||||
* infinite loop.
|
||||
*/
|
||||
#if !defined(CH_CFG_NO_IDLE_THREAD)
|
||||
#define CH_CFG_NO_IDLE_THREAD FALSE
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Performance options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief OS optimization.
|
||||
* @details If enabled then time efficient rather than space efficient code
|
||||
* is used when two possible implementations exist.
|
||||
*
|
||||
* @note This is not related to the compiler optimization options.
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_OPTIMIZE_SPEED)
|
||||
#define CH_CFG_OPTIMIZE_SPEED TRUE
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Subsystem options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Time Measurement APIs.
|
||||
* @details If enabled then the time measurement APIs are included in
|
||||
* the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_TM)
|
||||
#define CH_CFG_USE_TM TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Threads registry APIs.
|
||||
* @details If enabled then the registry APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_REGISTRY)
|
||||
#define CH_CFG_USE_REGISTRY TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Threads synchronization APIs.
|
||||
* @details If enabled then the @p chThdWait() function is included in
|
||||
* the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_WAITEXIT)
|
||||
#define CH_CFG_USE_WAITEXIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Semaphores APIs.
|
||||
* @details If enabled then the Semaphores APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_SEMAPHORES)
|
||||
#define CH_CFG_USE_SEMAPHORES TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Semaphores queuing mode.
|
||||
* @details If enabled then the threads are enqueued on semaphores by
|
||||
* priority rather than in FIFO order.
|
||||
*
|
||||
* @note The default is @p FALSE. Enable this if you have special
|
||||
* requirements.
|
||||
* @note Requires @p CH_CFG_USE_SEMAPHORES.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
|
||||
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Mutexes APIs.
|
||||
* @details If enabled then the mutexes APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MUTEXES)
|
||||
#define CH_CFG_USE_MUTEXES TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables recursive behavior on mutexes.
|
||||
* @note Recursive mutexes are heavier and have an increased
|
||||
* memory footprint.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note Requires @p CH_CFG_USE_MUTEXES.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
|
||||
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Conditional Variables APIs.
|
||||
* @details If enabled then the conditional variables APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_MUTEXES.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_CONDVARS)
|
||||
#define CH_CFG_USE_CONDVARS TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Conditional Variables APIs with timeout.
|
||||
* @details If enabled then the conditional variables APIs with timeout
|
||||
* specification are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_CONDVARS.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
|
||||
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Events Flags APIs.
|
||||
* @details If enabled then the event flags APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_EVENTS)
|
||||
#define CH_CFG_USE_EVENTS TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Events Flags APIs with timeout.
|
||||
* @details If enabled then the events APIs with timeout specification
|
||||
* are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_EVENTS.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
|
||||
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Synchronous Messages APIs.
|
||||
* @details If enabled then the synchronous messages APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MESSAGES)
|
||||
#define CH_CFG_USE_MESSAGES TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Synchronous Messages queuing mode.
|
||||
* @details If enabled then messages are served by priority rather than in
|
||||
* FIFO order.
|
||||
*
|
||||
* @note The default is @p FALSE. Enable this if you have special
|
||||
* requirements.
|
||||
* @note Requires @p CH_CFG_USE_MESSAGES.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
|
||||
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Mailboxes APIs.
|
||||
* @details If enabled then the asynchronous messages (mailboxes) APIs are
|
||||
* included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_SEMAPHORES.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MAILBOXES)
|
||||
#define CH_CFG_USE_MAILBOXES TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Core Memory Manager APIs.
|
||||
* @details If enabled then the core memory manager APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MEMCORE)
|
||||
#define CH_CFG_USE_MEMCORE TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Heap Allocator APIs.
|
||||
* @details If enabled then the memory heap allocator APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
|
||||
* @p CH_CFG_USE_SEMAPHORES.
|
||||
* @note Mutexes are recommended.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_HEAP)
|
||||
#define CH_CFG_USE_HEAP TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Memory Pools Allocator APIs.
|
||||
* @details If enabled then the memory pools allocator APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MEMPOOLS)
|
||||
#define CH_CFG_USE_MEMPOOLS TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Objects FIFOs APIs.
|
||||
* @details If enabled then the objects FIFOs APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_OBJ_FIFOS)
|
||||
#define CH_CFG_USE_OBJ_FIFOS TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Pipes APIs.
|
||||
* @details If enabled then the pipes APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_PIPES)
|
||||
#define CH_CFG_USE_PIPES TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Dynamic Threads APIs.
|
||||
* @details If enabled then the dynamic threads creation APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_WAITEXIT.
|
||||
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_DYNAMIC)
|
||||
#define CH_CFG_USE_DYNAMIC TRUE
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Objects factory options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Objects Factory APIs.
|
||||
* @details If enabled then the objects factory APIs are included in the
|
||||
* kernel.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_FACTORY)
|
||||
#define CH_CFG_USE_FACTORY TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Maximum length for object names.
|
||||
* @details If the specified length is zero then the name is stored by
|
||||
* pointer but this could have unintended side effects.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
|
||||
#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the registry of generic objects.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
|
||||
#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables factory for generic buffers.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
|
||||
#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables factory for semaphores.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_SEMAPHORES)
|
||||
#define CH_CFG_FACTORY_SEMAPHORES TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables factory for mailboxes.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_MAILBOXES)
|
||||
#define CH_CFG_FACTORY_MAILBOXES TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables factory for objects FIFOs.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
|
||||
#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables factory for Pipes.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
|
||||
#define CH_CFG_FACTORY_PIPES TRUE
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Debug options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Debug option, kernel statistics.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#if !defined(CH_DBG_STATISTICS)
|
||||
#define CH_DBG_STATISTICS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Debug option, system state check.
|
||||
* @details If enabled the correct call protocol for system APIs is checked
|
||||
* at runtime.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
|
||||
#define CH_DBG_SYSTEM_STATE_CHECK FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Debug option, parameters checks.
|
||||
* @details If enabled then the checks on the API functions input
|
||||
* parameters are activated.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#if !defined(CH_DBG_ENABLE_CHECKS)
|
||||
#define CH_DBG_ENABLE_CHECKS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Debug option, consistency checks.
|
||||
* @details If enabled then all the assertions in the kernel code are
|
||||
* activated. This includes consistency checks inside the kernel,
|
||||
* runtime anomalies and port-defined checks.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#if !defined(CH_DBG_ENABLE_ASSERTS)
|
||||
#define CH_DBG_ENABLE_ASSERTS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Debug option, trace buffer.
|
||||
* @details If enabled then the trace buffer is activated.
|
||||
*
|
||||
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
|
||||
*/
|
||||
#if !defined(CH_DBG_TRACE_MASK)
|
||||
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Trace buffer entries.
|
||||
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
|
||||
* different from @p CH_DBG_TRACE_MASK_DISABLED.
|
||||
*/
|
||||
#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
|
||||
#define CH_DBG_TRACE_BUFFER_SIZE 128
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Debug option, stack checks.
|
||||
* @details If enabled then a runtime stack check is performed.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note The stack check is performed in a architecture/port dependent way.
|
||||
* It may not be implemented or some ports.
|
||||
* @note The default failure mode is to halt the system with the global
|
||||
* @p panic_msg variable set to @p NULL.
|
||||
*/
|
||||
#if !defined(CH_DBG_ENABLE_STACK_CHECK)
|
||||
#define CH_DBG_ENABLE_STACK_CHECK FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Debug option, stacks initialization.
|
||||
* @details If enabled then the threads working area is filled with a byte
|
||||
* value when a thread is created. This can be useful for the
|
||||
* runtime measurement of the used stack.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#if !defined(CH_DBG_FILL_THREADS)
|
||||
#define CH_DBG_FILL_THREADS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Debug option, threads profiling.
|
||||
* @details If enabled then a field is added to the @p thread_t structure that
|
||||
* counts the system ticks occurred while executing the thread.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note This debug option is not currently compatible with the
|
||||
* tickless mode.
|
||||
*/
|
||||
#if !defined(CH_DBG_THREADS_PROFILING)
|
||||
#define CH_DBG_THREADS_PROFILING FALSE
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Kernel hooks
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief System structure extension.
|
||||
* @details User fields added to the end of the @p ch_system_t structure.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_EXTRA_FIELDS \
|
||||
/* Add threads custom fields here.*/
|
||||
|
||||
/**
|
||||
* @brief System initialization hook.
|
||||
* @details User initialization code added to the @p chSysInit() function
|
||||
* just before interrupts are enabled globally.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_INIT_HOOK() { \
|
||||
/* Add threads initialization code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Threads descriptor structure extension.
|
||||
* @details User fields added to the end of the @p thread_t structure.
|
||||
*/
|
||||
#define CH_CFG_THREAD_EXTRA_FIELDS \
|
||||
/* Add threads custom fields here.*/
|
||||
|
||||
/**
|
||||
* @brief Threads initialization hook.
|
||||
* @details User initialization code added to the @p _thread_init() function.
|
||||
*
|
||||
* @note It is invoked from within @p _thread_init() and implicitly from all
|
||||
* the threads creation APIs.
|
||||
*/
|
||||
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
|
||||
/* Add threads initialization code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Threads finalization hook.
|
||||
* @details User finalization code added to the @p chThdExit() API.
|
||||
*/
|
||||
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
|
||||
/* Add threads finalization code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Context switch hook.
|
||||
* @details This hook is invoked just before switching between threads.
|
||||
*/
|
||||
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
|
||||
/* Context switch code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ISR enter hook.
|
||||
*/
|
||||
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
|
||||
/* IRQ prologue code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ISR exit hook.
|
||||
*/
|
||||
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
|
||||
/* IRQ epilogue code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle thread enter hook.
|
||||
* @note This hook is invoked within a critical zone, no OS functions
|
||||
* should be invoked from here.
|
||||
* @note This macro can be used to activate a power saving mode.
|
||||
*/
|
||||
#define CH_CFG_IDLE_ENTER_HOOK() { \
|
||||
/* Idle-enter code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle thread leave hook.
|
||||
* @note This hook is invoked within a critical zone, no OS functions
|
||||
* should be invoked from here.
|
||||
* @note This macro can be used to deactivate a power saving mode.
|
||||
*/
|
||||
#define CH_CFG_IDLE_LEAVE_HOOK() { \
|
||||
/* Idle-leave code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle Loop hook.
|
||||
* @details This hook is continuously invoked by the idle thread loop.
|
||||
*/
|
||||
#define CH_CFG_IDLE_LOOP_HOOK() { \
|
||||
/* Idle loop code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System tick event hook.
|
||||
* @details This hook is invoked in the system tick handler immediately
|
||||
* after processing the virtual timers queue.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_TICK_HOOK() { \
|
||||
/* System tick event code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System halt hook.
|
||||
* @details This hook is invoked in case to a system halting error before
|
||||
* the system is halted.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
|
||||
/* System halt code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Trace hook.
|
||||
* @details This hook is invoked each time a new record is written in the
|
||||
* trace buffer.
|
||||
*/
|
||||
#define CH_CFG_TRACE_HOOK(tep) { \
|
||||
/* Trace code here.*/ \
|
||||
}
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Port-specific settings (override port settings defaulted in chcore.h). */
|
||||
/*===========================================================================*/
|
||||
|
||||
#endif /* CHCONF_H */
|
||||
|
||||
/** @} */
|
||||
@@ -20,4 +20,6 @@
|
||||
#define STM32_LSECLK 32768U
|
||||
#define STM32_HSECLK 25000000U
|
||||
|
||||
#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
|
||||
#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
|
||||
# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
|
||||
#endif
|
||||
|
||||
@@ -1,525 +0,0 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file templates/halconf.h
|
||||
* @brief HAL configuration header.
|
||||
* @details HAL configuration file, this file allows to enable or disable the
|
||||
* various device drivers from your application. You may also use
|
||||
* this file in order to override the device drivers default settings.
|
||||
*
|
||||
* @addtogroup HAL_CONF
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef HALCONF_H
|
||||
#define HALCONF_H
|
||||
|
||||
#define _CHIBIOS_HAL_CONF_
|
||||
#define _CHIBIOS_HAL_CONF_VER_7_0_
|
||||
|
||||
#include "mcuconf.h"
|
||||
|
||||
/**
|
||||
* @brief Enables the PAL subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_PAL TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the ADC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_ADC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the CAN subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_CAN FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the cryptographic subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_CRY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the DAC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_DAC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the GPT subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_GPT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the I2C subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_I2C FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the I2S subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_I2S FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the ICU subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_ICU FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the MAC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_MAC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the MMC_SPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_MMC_SPI FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the PWM subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_PWM FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the RTC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_RTC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SDC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SDC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SERIAL FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL over USB subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SERIAL_USB FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SIO subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SIO FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SPI FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the TRNG subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_TRNG FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the UART subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_UART FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the USB subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_USB TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the WDG subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_WDG FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the WSPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_WSPI FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* PAL driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
|
||||
#define PAL_USE_CALLBACKS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define PAL_USE_WAIT FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* ADC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define ADC_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define ADC_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* CAN driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Sleep mode related APIs inclusion switch.
|
||||
*/
|
||||
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
|
||||
#define CAN_USE_SLEEP_MODE TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enforces the driver to use direct callbacks rather than OSAL events.
|
||||
*/
|
||||
#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
|
||||
#define CAN_ENFORCE_USE_CALLBACKS FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* CRY driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables the SW fall-back of the cryptographic driver.
|
||||
* @details When enabled, this option, activates a fall-back software
|
||||
* implementation for algorithms not supported by the underlying
|
||||
* hardware.
|
||||
* @note Fall-back implementations may not be present for all algorithms.
|
||||
*/
|
||||
#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
|
||||
#define HAL_CRY_USE_FALLBACK FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Makes the driver forcibly use the fall-back implementations.
|
||||
*/
|
||||
#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
|
||||
#define HAL_CRY_ENFORCE_FALLBACK FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* DAC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define DAC_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define DAC_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* I2C driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables the mutual exclusion APIs on the I2C bus.
|
||||
*/
|
||||
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define I2C_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* MAC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables the zero-copy API.
|
||||
*/
|
||||
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
|
||||
#define MAC_USE_ZERO_COPY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables an event sources for incoming packets.
|
||||
*/
|
||||
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
|
||||
#define MAC_USE_EVENTS TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* MMC_SPI driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Delays insertions.
|
||||
* @details If enabled this options inserts delays into the MMC waiting
|
||||
* routines releasing some extra CPU time for the threads with
|
||||
* lower priority, this may slow down the driver a bit however.
|
||||
* This option is recommended also if the SPI driver does not
|
||||
* use a DMA channel and heavily loads the CPU.
|
||||
*/
|
||||
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
|
||||
#define MMC_NICE_WAITING TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SDC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Number of initialization attempts before rejecting the card.
|
||||
* @note Attempts are performed at 10mS intervals.
|
||||
*/
|
||||
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
|
||||
#define SDC_INIT_RETRY 100
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Include support for MMC cards.
|
||||
* @note MMC support is not yet implemented so this option must be kept
|
||||
* at @p FALSE.
|
||||
*/
|
||||
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
|
||||
#define SDC_MMC_SUPPORT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Delays insertions.
|
||||
* @details If enabled this options inserts delays into the MMC waiting
|
||||
* routines releasing some extra CPU time for the threads with
|
||||
* lower priority, this may slow down the driver a bit however.
|
||||
*/
|
||||
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
|
||||
#define SDC_NICE_WAITING TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief OCR initialization constant for V20 cards.
|
||||
*/
|
||||
#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
|
||||
#define SDC_INIT_OCR_V20 0x50FF8000U
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief OCR initialization constant for non-V20 cards.
|
||||
*/
|
||||
#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
|
||||
#define SDC_INIT_OCR 0x80100000U
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SERIAL driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Default bit rate.
|
||||
* @details Configuration parameter, this is the baud rate selected for the
|
||||
* default configuration.
|
||||
*/
|
||||
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_DEFAULT_BITRATE 38400
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Serial buffers size.
|
||||
* @details Configuration parameter, you can change the depth of the queue
|
||||
* buffers depending on the requirements of your application.
|
||||
* @note The default is 16 bytes for both the transmission and receive
|
||||
* buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_BUFFERS_SIZE 16
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SERIAL_USB driver related setting. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Serial over USB buffers size.
|
||||
* @details Configuration parameter, the buffer size must be a multiple of
|
||||
* the USB data endpoint maximum packet size.
|
||||
* @note The default is 256 bytes for both the transmission and receive
|
||||
* buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_USB_BUFFERS_SIZE 256
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Serial over USB number of buffers.
|
||||
* @note The default is 2 buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
|
||||
#define SERIAL_USB_BUFFERS_NUMBER 2
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SPI driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define SPI_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables circular transfers APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
|
||||
#define SPI_USE_CIRCULAR FALSE
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define SPI_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Handling method for SPI CS line.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
|
||||
#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* UART driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define UART_USE_WAIT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define UART_USE_MUTUAL_EXCLUSION FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* USB driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define USB_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* WSPI driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define WSPI_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define WSPI_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
#endif /* HALCONF_H */
|
||||
|
||||
/** @} */
|
||||
@@ -19,8 +19,8 @@
|
||||
* generator plugin. Do not edit manually.
|
||||
*/
|
||||
|
||||
#include "hal.h"
|
||||
#include "stm32_gpio.h"
|
||||
#include <hal.h>
|
||||
#include <stm32_gpio.h>
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver local definitions. */
|
||||
@@ -202,16 +202,12 @@ static void stm32_gpio_init(void) {
|
||||
/* Driver exported functions. */
|
||||
/*===========================================================================*/
|
||||
|
||||
__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {}
|
||||
|
||||
/**
|
||||
* @brief Early initialization code.
|
||||
* @details GPIO ports and system clocks are initialized before everything
|
||||
* else.
|
||||
*/
|
||||
void __early_init(void) {
|
||||
enter_bootloader_mode_if_requested();
|
||||
|
||||
stm32_gpio_init();
|
||||
stm32_clock_init();
|
||||
}
|
||||
|
||||
@@ -1,7 +1,5 @@
|
||||
/* Address for jumping to bootloader on STM32 chips. */
|
||||
/* It is chip dependent, the correct number can be looked up here:
|
||||
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
* This also requires a patch to chibios:
|
||||
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
*/
|
||||
#define STM32_BOOTLOADER_ADDRESS 0x1FFFC400
|
||||
#define STM32_BOOTLOADER_ADDRESS 0x1FFFC400
|
||||
|
||||
@@ -0,0 +1,20 @@
|
||||
/* Copyright 2020 Nick Brassel (tzarc)
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
|
||||
# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
|
||||
#endif
|
||||
@@ -0,0 +1,168 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef _MCUCONF_H_
|
||||
#define _MCUCONF_H_
|
||||
|
||||
/*
|
||||
* STM32F0xx drivers configuration.
|
||||
* The following settings override the default settings present in
|
||||
* the various device driver implementation headers.
|
||||
* Note that the settings for each driver only have effect if the whole
|
||||
* driver is enabled in halconf.h.
|
||||
*
|
||||
* IRQ priorities:
|
||||
* 3...0 Lowest...Highest.
|
||||
*
|
||||
* DMA priorities:
|
||||
* 0...3 Lowest...Highest.
|
||||
*/
|
||||
|
||||
#define STM32F0xx_MCUCONF
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_NO_INIT FALSE
|
||||
#define STM32_PVD_ENABLE FALSE
|
||||
#define STM32_PLS STM32_PLS_LEV0
|
||||
#define STM32_HSI_ENABLED TRUE
|
||||
#define STM32_HSI14_ENABLED TRUE
|
||||
#define STM32_HSI48_ENABLED FALSE
|
||||
#define STM32_LSI_ENABLED TRUE
|
||||
#define STM32_HSE_ENABLED FALSE
|
||||
#define STM32_LSE_ENABLED FALSE
|
||||
#define STM32_SW STM32_SW_PLL
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
|
||||
#define STM32_PREDIV_VALUE 1
|
||||
#define STM32_PLLMUL_VALUE 12
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_PPRE STM32_PPRE_DIV1
|
||||
#define STM32_ADCSW STM32_ADCSW_HSI14
|
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4
|
||||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
|
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4
|
||||
#define STM32_ADCSW STM32_ADCSW_HSI14
|
||||
#define STM32_USBSW STM32_USBSW_HSI48
|
||||
#define STM32_CECSW STM32_CECSW_HSI
|
||||
#define STM32_I2C1SW STM32_I2C1SW_HSI
|
||||
#define STM32_USART1SW STM32_USART1SW_PCLK
|
||||
#define STM32_RTCSEL STM32_RTCSEL_LSI
|
||||
|
||||
/*
|
||||
* ADC driver system settings.
|
||||
*/
|
||||
#define STM32_ADC_USE_ADC1 FALSE
|
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
||||
#define STM32_ADC_IRQ_PRIORITY 2
|
||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
|
||||
|
||||
/*
|
||||
* EXT driver system settings.
|
||||
*/
|
||||
#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* GPT driver system settings.
|
||||
*/
|
||||
#define STM32_GPT_USE_TIM1 FALSE
|
||||
#define STM32_GPT_USE_TIM2 FALSE
|
||||
#define STM32_GPT_USE_TIM3 FALSE
|
||||
#define STM32_GPT_USE_TIM14 FALSE
|
||||
#define STM32_GPT_TIM1_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM2_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM3_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM14_IRQ_PRIORITY 2
|
||||
|
||||
/*
|
||||
* I2C driver system settings.
|
||||
*/
|
||||
#define STM32_I2C_USE_I2C1 FALSE
|
||||
#define STM32_I2C_USE_I2C2 FALSE
|
||||
#define STM32_I2C_BUSY_TIMEOUT 50
|
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 3
|
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 3
|
||||
#define STM32_I2C_USE_DMA TRUE
|
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 1
|
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 1
|
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ICU driver system settings.
|
||||
*/
|
||||
#define STM32_ICU_USE_TIM1 FALSE
|
||||
#define STM32_ICU_USE_TIM2 FALSE
|
||||
#define STM32_ICU_USE_TIM3 FALSE
|
||||
#define STM32_ICU_TIM1_IRQ_PRIORITY 3
|
||||
#define STM32_ICU_TIM2_IRQ_PRIORITY 3
|
||||
#define STM32_ICU_TIM3_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define STM32_PWM_USE_ADVANCED FALSE
|
||||
#define STM32_PWM_USE_TIM1 FALSE
|
||||
#define STM32_PWM_USE_TIM2 FALSE
|
||||
#define STM32_PWM_USE_TIM3 FALSE
|
||||
#define STM32_PWM_TIM1_IRQ_PRIORITY 3
|
||||
#define STM32_PWM_TIM2_IRQ_PRIORITY 3
|
||||
#define STM32_PWM_TIM3_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#define STM32_SERIAL_USE_USART1 FALSE
|
||||
#define STM32_SERIAL_USE_USART2 FALSE
|
||||
#define STM32_SERIAL_USART1_PRIORITY 3
|
||||
#define STM32_SERIAL_USART2_PRIORITY 3
|
||||
|
||||
/*
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#define STM32_SPI_USE_SPI1 FALSE
|
||||
#define STM32_SPI_USE_SPI2 FALSE
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 2
|
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 2
|
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ST driver system settings.
|
||||
*/
|
||||
#define STM32_ST_IRQ_PRIORITY 2
|
||||
#define STM32_ST_USE_TIMER 2
|
||||
|
||||
/*
|
||||
* UART driver system settings.
|
||||
*/
|
||||
#define STM32_UART_USE_USART1 FALSE
|
||||
#define STM32_UART_USE_USART2 FALSE
|
||||
#define STM32_UART_USART1_IRQ_PRIORITY 3
|
||||
#define STM32_UART_USART2_IRQ_PRIORITY 3
|
||||
#define STM32_UART_USART1_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART2_DMA_PRIORITY 0
|
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* USB driver system settings.
|
||||
*/
|
||||
#define STM32_USB_USE_USB1 TRUE
|
||||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
|
||||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
|
||||
|
||||
#endif /* _MCUCONF_H_ */
|
||||
@@ -1,250 +0,0 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* This file has been automatically generated using ChibiStudio board
|
||||
* generator plugin. Do not edit manually.
|
||||
*/
|
||||
|
||||
#include "hal.h"
|
||||
#include "stm32_gpio.h"
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver local definitions. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver exported variables. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver local variables and types. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Type of STM32 GPIO port setup.
|
||||
*/
|
||||
typedef struct {
|
||||
uint32_t moder;
|
||||
uint32_t otyper;
|
||||
uint32_t ospeedr;
|
||||
uint32_t pupdr;
|
||||
uint32_t odr;
|
||||
uint32_t afrl;
|
||||
uint32_t afrh;
|
||||
} gpio_setup_t;
|
||||
|
||||
/**
|
||||
* @brief Type of STM32 GPIO initialization data.
|
||||
*/
|
||||
typedef struct {
|
||||
#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
|
||||
gpio_setup_t PAData;
|
||||
#endif
|
||||
#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
|
||||
gpio_setup_t PBData;
|
||||
#endif
|
||||
#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
|
||||
gpio_setup_t PCData;
|
||||
#endif
|
||||
#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
|
||||
gpio_setup_t PDData;
|
||||
#endif
|
||||
#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
|
||||
gpio_setup_t PEData;
|
||||
#endif
|
||||
#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
|
||||
gpio_setup_t PFData;
|
||||
#endif
|
||||
#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
|
||||
gpio_setup_t PGData;
|
||||
#endif
|
||||
#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
|
||||
gpio_setup_t PHData;
|
||||
#endif
|
||||
#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
|
||||
gpio_setup_t PIData;
|
||||
#endif
|
||||
#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
|
||||
gpio_setup_t PJData;
|
||||
#endif
|
||||
#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
|
||||
gpio_setup_t PKData;
|
||||
#endif
|
||||
} gpio_config_t;
|
||||
|
||||
/**
|
||||
* @brief STM32 GPIO static initialization data.
|
||||
*/
|
||||
static const gpio_config_t gpio_default_config = {
|
||||
#if STM32_HAS_GPIOA
|
||||
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOB
|
||||
{VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOC
|
||||
{VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOD
|
||||
{VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOE
|
||||
{VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOF
|
||||
{VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOG
|
||||
{VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOH
|
||||
{VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOI
|
||||
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOJ
|
||||
{VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOK
|
||||
{VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH}
|
||||
#endif
|
||||
};
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver local functions. */
|
||||
/*===========================================================================*/
|
||||
|
||||
static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
|
||||
gpiop->OTYPER = config->otyper;
|
||||
gpiop->OSPEEDR = config->ospeedr;
|
||||
gpiop->PUPDR = config->pupdr;
|
||||
gpiop->ODR = config->odr;
|
||||
gpiop->AFRL = config->afrl;
|
||||
gpiop->AFRH = config->afrh;
|
||||
gpiop->MODER = config->moder;
|
||||
}
|
||||
|
||||
static void stm32_gpio_init(void) {
|
||||
/* Enabling GPIO-related clocks, the mask comes from the
|
||||
registry header file.*/
|
||||
rccResetAHB(STM32_GPIO_EN_MASK);
|
||||
rccEnableAHB(STM32_GPIO_EN_MASK, true);
|
||||
|
||||
/* Initializing all the defined GPIO ports.*/
|
||||
#if STM32_HAS_GPIOA
|
||||
gpio_init(GPIOA, &gpio_default_config.PAData);
|
||||
#endif
|
||||
#if STM32_HAS_GPIOB
|
||||
gpio_init(GPIOB, &gpio_default_config.PBData);
|
||||
#endif
|
||||
#if STM32_HAS_GPIOC
|
||||
gpio_init(GPIOC, &gpio_default_config.PCData);
|
||||
#endif
|
||||
#if STM32_HAS_GPIOD
|
||||
gpio_init(GPIOD, &gpio_default_config.PDData);
|
||||
#endif
|
||||
#if STM32_HAS_GPIOE
|
||||
gpio_init(GPIOE, &gpio_default_config.PEData);
|
||||
#endif
|
||||
#if STM32_HAS_GPIOF
|
||||
gpio_init(GPIOF, &gpio_default_config.PFData);
|
||||
#endif
|
||||
#if STM32_HAS_GPIOG
|
||||
gpio_init(GPIOG, &gpio_default_config.PGData);
|
||||
#endif
|
||||
#if STM32_HAS_GPIOH
|
||||
gpio_init(GPIOH, &gpio_default_config.PHData);
|
||||
#endif
|
||||
#if STM32_HAS_GPIOI
|
||||
gpio_init(GPIOI, &gpio_default_config.PIData);
|
||||
#endif
|
||||
#if STM32_HAS_GPIOJ
|
||||
gpio_init(GPIOJ, &gpio_default_config.PJData);
|
||||
#endif
|
||||
#if STM32_HAS_GPIOK
|
||||
gpio_init(GPIOK, &gpio_default_config.PKData);
|
||||
#endif
|
||||
}
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver interrupt handlers. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver exported functions. */
|
||||
/*===========================================================================*/
|
||||
|
||||
__attribute__((weak)) void enter_bootloader_mode_if_requested(void) {}
|
||||
|
||||
/**
|
||||
* @brief Early initialization code.
|
||||
* @details GPIO ports and system clocks are initialized before everything
|
||||
* else.
|
||||
*/
|
||||
void __early_init(void) {
|
||||
enter_bootloader_mode_if_requested();
|
||||
|
||||
stm32_gpio_init();
|
||||
stm32_clock_init();
|
||||
}
|
||||
|
||||
#if HAL_USE_SDC || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief SDC card detection.
|
||||
*/
|
||||
bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
|
||||
(void)sdcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return true;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SDC card write protection detection.
|
||||
*/
|
||||
bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
|
||||
(void)sdcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return false;
|
||||
}
|
||||
#endif /* HAL_USE_SDC */
|
||||
|
||||
#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief MMC_SPI card detection.
|
||||
*/
|
||||
bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
|
||||
(void)mmcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return true;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief MMC_SPI card write protection detection.
|
||||
*/
|
||||
bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
|
||||
(void)mmcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return false;
|
||||
}
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Board-specific initialization code.
|
||||
* @todo Add your board-specific code, if any.
|
||||
*/
|
||||
void boardInit(void) {}
|
||||
@@ -1,407 +0,0 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* This file has been automatically generated using ChibiStudio board
|
||||
* generator plugin. Do not edit manually.
|
||||
*/
|
||||
|
||||
#ifndef BOARD_H
|
||||
#define BOARD_H
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver constants. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/*
|
||||
* Setup for Generic STM32_F072 Board
|
||||
*/
|
||||
|
||||
/*
|
||||
* Board identifier.
|
||||
*/
|
||||
#define BOARD_GENERIC_STM32_F072XB
|
||||
#define BOARD_NAME "STM32_F072"
|
||||
|
||||
/*
|
||||
* Board oscillators-related settings.
|
||||
* NOTE: LSE not fitted.
|
||||
* NOTE: HSE not fitted.
|
||||
*/
|
||||
#if !defined(STM32_LSECLK)
|
||||
# define STM32_LSECLK 0U
|
||||
#endif
|
||||
|
||||
#define STM32_LSEDRV (3U << 3U)
|
||||
|
||||
#if !defined(STM32_HSECLK)
|
||||
# define STM32_HSECLK 0U
|
||||
#endif
|
||||
|
||||
#define STM32_HSE_BYPASS
|
||||
|
||||
/*
|
||||
* MCU type as defined in the ST header.
|
||||
*/
|
||||
#define STM32F072xB
|
||||
|
||||
/*
|
||||
* IO pins assignments.
|
||||
*/
|
||||
#define GPIOA_BUTTON 0U
|
||||
#define GPIOA_PIN1 1U
|
||||
#define GPIOA_PIN2 2U
|
||||
#define GPIOA_PIN3 3U
|
||||
#define GPIOA_PIN4 4U
|
||||
#define GPIOA_PIN5 5U
|
||||
#define GPIOA_PIN6 6U
|
||||
#define GPIOA_PIN7 7U
|
||||
#define GPIOA_PIN8 8U
|
||||
#define GPIOA_PIN9 9U
|
||||
#define GPIOA_PIN10 10U
|
||||
#define GPIOA_USB_DM 11U
|
||||
#define GPIOA_USB_DP 12U
|
||||
#define GPIOA_SWDIO 13U
|
||||
#define GPIOA_SWCLK 14U
|
||||
#define GPIOA_PIN15 15U
|
||||
|
||||
#define GPIOB_PIN0 0U
|
||||
#define GPIOB_PIN1 1U
|
||||
#define GPIOB_PIN2 2U
|
||||
#define GPIOB_PIN3 3U
|
||||
#define GPIOB_PIN4 4U
|
||||
#define GPIOB_PIN5 5U
|
||||
#define GPIOB_PIN6 6U
|
||||
#define GPIOB_PIN7 7U
|
||||
#define GPIOB_PIN8 8U
|
||||
#define GPIOB_PIN9 9U
|
||||
#define GPIOB_PIN10 10U
|
||||
#define GPIOB_PIN11 11U
|
||||
#define GPIOB_PIN12 12U
|
||||
#define GPIOB_SPI2_SCK 13U
|
||||
#define GPIOB_SPI2_MISO 14U
|
||||
#define GPIOB_SPI2_MOSI 15U
|
||||
|
||||
#define GPIOC_MEMS_CS 0U
|
||||
#define GPIOC_PIN1 1U
|
||||
#define GPIOC_PIN2 2U
|
||||
#define GPIOC_PIN3 3U
|
||||
#define GPIOC_PIN4 4U
|
||||
#define GPIOC_PIN5 5U
|
||||
#define GPIOC_LED_RED 6U
|
||||
#define GPIOC_LED_BLUE 7U
|
||||
#define GPIOC_LED_ORANGE 8U
|
||||
#define GPIOC_LED_GREEN 9U
|
||||
#define GPIOC_PIN10 10U
|
||||
#define GPIOC_PIN11 11U
|
||||
#define GPIOC_PIN12 12U
|
||||
#define GPIOC_PIN13 13U
|
||||
#define GPIOC_OSC32_IN 14U
|
||||
#define GPIOC_OSC32_OUT 15U
|
||||
|
||||
#define GPIOD_PIN0 0U
|
||||
#define GPIOD_PIN1 1U
|
||||
#define GPIOD_PIN2 2U
|
||||
#define GPIOD_PIN3 3U
|
||||
#define GPIOD_PIN4 4U
|
||||
#define GPIOD_PIN5 5U
|
||||
#define GPIOD_PIN6 6U
|
||||
#define GPIOD_PIN7 7U
|
||||
#define GPIOD_PIN8 8U
|
||||
#define GPIOD_PIN9 9U
|
||||
#define GPIOD_PIN10 10U
|
||||
#define GPIOD_PIN11 11U
|
||||
#define GPIOD_PIN12 12U
|
||||
#define GPIOD_PIN13 13U
|
||||
#define GPIOD_PIN14 14U
|
||||
#define GPIOD_PIN15 15U
|
||||
|
||||
#define GPIOE_PIN0 0U
|
||||
#define GPIOE_PIN1 1U
|
||||
#define GPIOE_PIN2 2U
|
||||
#define GPIOE_PIN3 3U
|
||||
#define GPIOE_PIN4 4U
|
||||
#define GPIOE_PIN5 5U
|
||||
#define GPIOE_PIN6 6U
|
||||
#define GPIOE_PIN7 7U
|
||||
#define GPIOE_PIN8 8U
|
||||
#define GPIOE_PIN9 9U
|
||||
#define GPIOE_PIN10 10U
|
||||
#define GPIOE_PIN11 11U
|
||||
#define GPIOE_PIN12 12U
|
||||
#define GPIOE_PIN13 13U
|
||||
#define GPIOE_PIN14 14U
|
||||
#define GPIOE_PIN15 15U
|
||||
|
||||
#define GPIOF_OSC_IN 0U
|
||||
#define GPIOF_OSC_OUT 1U
|
||||
#define GPIOF_PIN2 2U
|
||||
#define GPIOF_PIN3 3U
|
||||
#define GPIOF_PIN4 4U
|
||||
#define GPIOF_PIN5 5U
|
||||
#define GPIOF_PIN6 6U
|
||||
#define GPIOF_PIN7 7U
|
||||
#define GPIOF_PIN8 8U
|
||||
#define GPIOF_PIN9 9U
|
||||
#define GPIOF_PIN10 10U
|
||||
#define GPIOF_PIN11 11U
|
||||
#define GPIOF_PIN12 12U
|
||||
#define GPIOF_PIN13 13U
|
||||
#define GPIOF_PIN14 14U
|
||||
#define GPIOF_PIN15 15U
|
||||
|
||||
/*
|
||||
* IO lines assignments.
|
||||
*/
|
||||
#define LINE_BUTTON PAL_LINE(GPIOA, 0U)
|
||||
#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
|
||||
#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
|
||||
#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
|
||||
#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
|
||||
#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U)
|
||||
#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U)
|
||||
#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U)
|
||||
#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U)
|
||||
#define LINE_LED_RED PAL_LINE(GPIOC, 6U)
|
||||
#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U)
|
||||
#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U)
|
||||
#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U)
|
||||
#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U)
|
||||
#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U)
|
||||
#define LINE_OSC_IN PAL_LINE(GPIOF, 0U)
|
||||
#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U)
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver pre-compile time settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Derived constants and error checks. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver data structures and types. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Driver macros. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/*
|
||||
* I/O ports initial setup, this configuration is established soon after reset
|
||||
* in the initialization code.
|
||||
* Please refer to the STM32 Reference Manual for details.
|
||||
*/
|
||||
#define PIN_MODE_INPUT(n) (0U << ((n)*2U))
|
||||
#define PIN_MODE_OUTPUT(n) (1U << ((n)*2U))
|
||||
#define PIN_MODE_ALTERNATE(n) (2U << ((n)*2U))
|
||||
#define PIN_MODE_ANALOG(n) (3U << ((n)*2U))
|
||||
#define PIN_ODR_LOW(n) (0U << (n))
|
||||
#define PIN_ODR_HIGH(n) (1U << (n))
|
||||
#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
|
||||
#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
|
||||
#define PIN_OSPEED_VERYLOW(n) (0U << ((n)*2U))
|
||||
#define PIN_OSPEED_LOW(n) (1U << ((n)*2U))
|
||||
#define PIN_OSPEED_MEDIUM(n) (2U << ((n)*2U))
|
||||
#define PIN_OSPEED_HIGH(n) (3U << ((n)*2U))
|
||||
#define PIN_PUPDR_FLOATING(n) (0U << ((n)*2U))
|
||||
#define PIN_PUPDR_PULLUP(n) (1U << ((n)*2U))
|
||||
#define PIN_PUPDR_PULLDOWN(n) (2U << ((n)*2U))
|
||||
#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
|
||||
|
||||
/*
|
||||
* GPIOA setup:
|
||||
*
|
||||
* PA0 - BUTTON (input floating).
|
||||
* PA1 - PIN1 (input pullup).
|
||||
* PA2 - PIN2 (input pullup).
|
||||
* PA3 - PIN3 (input pullup).
|
||||
* PA4 - PIN4 (input pullup).
|
||||
* PA5 - PIN5 (input pullup).
|
||||
* PA6 - PIN6 (input pullup).
|
||||
* PA7 - PIN7 (input pullup).
|
||||
* PA8 - PIN8 (input pullup).
|
||||
* PA9 - PIN9 (input pullup).
|
||||
* PA10 - PIN10 (input pullup).
|
||||
* PA11 - USB_DM (input floating).
|
||||
* PA12 - USB_DP (input floating).
|
||||
* PA13 - SWDIO (alternate 0).
|
||||
* PA14 - SWCLK (alternate 0).
|
||||
* PA15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | PIN_MODE_INPUT(GPIOA_PIN1) | PIN_MODE_INPUT(GPIOA_PIN2) | PIN_MODE_INPUT(GPIOA_PIN3) | PIN_MODE_INPUT(GPIOA_PIN4) | PIN_MODE_INPUT(GPIOA_PIN5) | PIN_MODE_INPUT(GPIOA_PIN6) | PIN_MODE_INPUT(GPIOA_PIN7) | PIN_MODE_INPUT(GPIOA_PIN8) | PIN_MODE_INPUT(GPIOA_PIN9) | PIN_MODE_INPUT(GPIOA_PIN10) | PIN_MODE_INPUT(GPIOA_USB_DM) | PIN_MODE_INPUT(GPIOA_USB_DP) | PIN_MODE_ALTERNATE(GPIOA_SWDIO) | PIN_MODE_ALTERNATE(GPIOA_SWCLK) | PIN_MODE_INPUT(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | PIN_OSPEED_VERYLOW(GPIOA_PIN1) | PIN_OSPEED_VERYLOW(GPIOA_PIN2) | PIN_OSPEED_VERYLOW(GPIOA_PIN3) | PIN_OSPEED_VERYLOW(GPIOA_PIN4) | PIN_OSPEED_VERYLOW(GPIOA_PIN5) | PIN_OSPEED_VERYLOW(GPIOA_PIN6) | PIN_OSPEED_VERYLOW(GPIOA_PIN7) | PIN_OSPEED_VERYLOW(GPIOA_PIN8) | PIN_OSPEED_VERYLOW(GPIOA_PIN9) | PIN_OSPEED_VERYLOW(GPIOA_PIN10) | PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | PIN_OSPEED_HIGH(GPIOA_SWDIO) | PIN_OSPEED_HIGH(GPIOA_SWCLK) | PIN_OSPEED_HIGH(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | PIN_PUPDR_PULLUP(GPIOA_PIN1) | PIN_PUPDR_PULLUP(GPIOA_PIN2) | PIN_PUPDR_PULLUP(GPIOA_PIN3) | PIN_PUPDR_PULLUP(GPIOA_PIN4) | PIN_PUPDR_PULLUP(GPIOA_PIN5) | PIN_PUPDR_PULLUP(GPIOA_PIN6) | PIN_PUPDR_PULLUP(GPIOA_PIN7) | PIN_PUPDR_PULLUP(GPIOA_PIN8) | PIN_PUPDR_PULLUP(GPIOA_PIN9) | PIN_PUPDR_PULLUP(GPIOA_PIN10) | PIN_PUPDR_FLOATING(GPIOA_USB_DM) | PIN_PUPDR_FLOATING(GPIOA_USB_DP) | PIN_PUPDR_PULLUP(GPIOA_SWDIO) | PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | PIN_PUPDR_PULLUP(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | PIN_ODR_HIGH(GPIOA_PIN1) | PIN_ODR_HIGH(GPIOA_PIN2) | PIN_ODR_HIGH(GPIOA_PIN3) | PIN_ODR_HIGH(GPIOA_PIN4) | PIN_ODR_HIGH(GPIOA_PIN5) | PIN_ODR_HIGH(GPIOA_PIN6) | PIN_ODR_HIGH(GPIOA_PIN7) | PIN_ODR_HIGH(GPIOA_PIN8) | PIN_ODR_HIGH(GPIOA_PIN9) | PIN_ODR_HIGH(GPIOA_PIN10) | PIN_ODR_HIGH(GPIOA_USB_DM) | PIN_ODR_HIGH(GPIOA_USB_DP) | PIN_ODR_HIGH(GPIOA_SWDIO) | PIN_ODR_HIGH(GPIOA_SWCLK) | PIN_ODR_HIGH(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | PIN_AFIO_AF(GPIOA_PIN1, 0U) | PIN_AFIO_AF(GPIOA_PIN2, 0U) | PIN_AFIO_AF(GPIOA_PIN3, 0U) | PIN_AFIO_AF(GPIOA_PIN4, 0U) | PIN_AFIO_AF(GPIOA_PIN5, 0U) | PIN_AFIO_AF(GPIOA_PIN6, 0U) | PIN_AFIO_AF(GPIOA_PIN7, 0U))
|
||||
#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | PIN_AFIO_AF(GPIOA_PIN9, 0U) | PIN_AFIO_AF(GPIOA_PIN10, 0U) | PIN_AFIO_AF(GPIOA_USB_DM, 0U) | PIN_AFIO_AF(GPIOA_USB_DP, 0U) | PIN_AFIO_AF(GPIOA_SWDIO, 0U) | PIN_AFIO_AF(GPIOA_SWCLK, 0U) | PIN_AFIO_AF(GPIOA_PIN15, 0U))
|
||||
|
||||
/*
|
||||
* GPIOB setup:
|
||||
*
|
||||
* PB0 - PIN0 (input pullup).
|
||||
* PB1 - PIN1 (input pullup).
|
||||
* PB2 - PIN2 (input pullup).
|
||||
* PB3 - PIN3 (input pullup).
|
||||
* PB4 - PIN4 (input pullup).
|
||||
* PB5 - PIN5 (input pullup).
|
||||
* PB6 - PIN6 (input pullup).
|
||||
* PB7 - PIN7 (input pullup).
|
||||
* PB8 - PIN8 (input pullup).
|
||||
* PB9 - PIN9 (input pullup).
|
||||
* PB10 - PIN10 (input pullup).
|
||||
* PB11 - PIN11 (input pullup).
|
||||
* PB12 - PIN12 (input pullup).
|
||||
* PB13 - SPI2_SCK (alternate 0).
|
||||
* PB14 - SPI2_MISO (alternate 0).
|
||||
* PB15 - SPI2_MOSI (alternate 0).
|
||||
*/
|
||||
#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | PIN_MODE_INPUT(GPIOB_PIN1) | PIN_MODE_INPUT(GPIOB_PIN2) | PIN_MODE_INPUT(GPIOB_PIN3) | PIN_MODE_INPUT(GPIOB_PIN4) | PIN_MODE_INPUT(GPIOB_PIN5) | PIN_MODE_INPUT(GPIOB_PIN6) | PIN_MODE_INPUT(GPIOB_PIN7) | PIN_MODE_INPUT(GPIOB_PIN8) | PIN_MODE_INPUT(GPIOB_PIN9) | PIN_MODE_INPUT(GPIOB_PIN10) | PIN_MODE_INPUT(GPIOB_PIN11) | PIN_MODE_INPUT(GPIOB_PIN12) | PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | PIN_OSPEED_VERYLOW(GPIOB_PIN1) | PIN_OSPEED_HIGH(GPIOB_PIN2) | PIN_OSPEED_HIGH(GPIOB_PIN3) | PIN_OSPEED_HIGH(GPIOB_PIN4) | PIN_OSPEED_VERYLOW(GPIOB_PIN5) | PIN_OSPEED_VERYLOW(GPIOB_PIN6) | PIN_OSPEED_VERYLOW(GPIOB_PIN7) | PIN_OSPEED_VERYLOW(GPIOB_PIN8) | PIN_OSPEED_VERYLOW(GPIOB_PIN9) | PIN_OSPEED_VERYLOW(GPIOB_PIN10) | PIN_OSPEED_VERYLOW(GPIOB_PIN11) | PIN_OSPEED_VERYLOW(GPIOB_PIN12) | PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | PIN_PUPDR_PULLUP(GPIOB_PIN1) | PIN_PUPDR_PULLUP(GPIOB_PIN2) | PIN_PUPDR_PULLUP(GPIOB_PIN3) | PIN_PUPDR_PULLUP(GPIOB_PIN4) | PIN_PUPDR_PULLUP(GPIOB_PIN5) | PIN_PUPDR_PULLUP(GPIOB_PIN6) | PIN_PUPDR_PULLUP(GPIOB_PIN7) | PIN_PUPDR_PULLUP(GPIOB_PIN8) | PIN_PUPDR_PULLUP(GPIOB_PIN9) | PIN_PUPDR_PULLUP(GPIOB_PIN10) | PIN_PUPDR_PULLUP(GPIOB_PIN11) | PIN_PUPDR_PULLUP(GPIOB_PIN12) | PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | PIN_ODR_HIGH(GPIOB_PIN1) | PIN_ODR_HIGH(GPIOB_PIN2) | PIN_ODR_HIGH(GPIOB_PIN3) | PIN_ODR_HIGH(GPIOB_PIN4) | PIN_ODR_HIGH(GPIOB_PIN5) | PIN_ODR_HIGH(GPIOB_PIN6) | PIN_ODR_HIGH(GPIOB_PIN7) | PIN_ODR_HIGH(GPIOB_PIN8) | PIN_ODR_HIGH(GPIOB_PIN9) | PIN_ODR_HIGH(GPIOB_PIN10) | PIN_ODR_HIGH(GPIOB_PIN11) | PIN_ODR_HIGH(GPIOB_PIN12) | PIN_ODR_HIGH(GPIOB_SPI2_SCK) | PIN_ODR_HIGH(GPIOB_SPI2_MISO) | PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | PIN_AFIO_AF(GPIOB_PIN1, 0U) | PIN_AFIO_AF(GPIOB_PIN2, 0U) | PIN_AFIO_AF(GPIOB_PIN3, 0U) | PIN_AFIO_AF(GPIOB_PIN4, 0U) | PIN_AFIO_AF(GPIOB_PIN5, 0U) | PIN_AFIO_AF(GPIOB_PIN6, 0U) | PIN_AFIO_AF(GPIOB_PIN7, 0U))
|
||||
#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | PIN_AFIO_AF(GPIOB_PIN9, 0U) | PIN_AFIO_AF(GPIOB_PIN10, 0U) | PIN_AFIO_AF(GPIOB_PIN11, 0U) | PIN_AFIO_AF(GPIOB_PIN12, 0U) | PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
|
||||
|
||||
/*
|
||||
* GPIOC setup:
|
||||
*
|
||||
* PC0 - MEMS_CS (output pushpull maximum).
|
||||
* PC1 - PIN1 (input pullup).
|
||||
* PC2 - PIN2 (input pullup).
|
||||
* PC3 - PIN3 (input pullup).
|
||||
* PC4 - PIN4 (input pullup).
|
||||
* PC5 - PIN5 (input pullup).
|
||||
* PC6 - LED_RED (output pushpull maximum).
|
||||
* PC7 - LED_BLUE (output pushpull maximum).
|
||||
* PC8 - LED_ORANGE (output pushpull maximum).
|
||||
* PC9 - LED_GREEN (output pushpull maximum).
|
||||
* PC10 - PIN10 (input pullup).
|
||||
* PC11 - PIN11 (input pullup).
|
||||
* PC12 - PIN12 (input pullup).
|
||||
* PC13 - PIN13 (input pullup).
|
||||
* PC14 - OSC32_IN (input floating).
|
||||
* PC15 - OSC32_OUT (input floating).
|
||||
*/
|
||||
#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | PIN_MODE_INPUT(GPIOC_PIN1) | PIN_MODE_INPUT(GPIOC_PIN2) | PIN_MODE_INPUT(GPIOC_PIN3) | PIN_MODE_INPUT(GPIOC_PIN4) | PIN_MODE_INPUT(GPIOC_PIN5) | PIN_MODE_OUTPUT(GPIOC_LED_RED) | PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | PIN_MODE_INPUT(GPIOC_PIN10) | PIN_MODE_INPUT(GPIOC_PIN11) | PIN_MODE_INPUT(GPIOC_PIN12) | PIN_MODE_INPUT(GPIOC_PIN13) | PIN_MODE_INPUT(GPIOC_OSC32_IN) | PIN_MODE_INPUT(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | PIN_OSPEED_VERYLOW(GPIOC_PIN1) | PIN_OSPEED_VERYLOW(GPIOC_PIN2) | PIN_OSPEED_VERYLOW(GPIOC_PIN3) | PIN_OSPEED_VERYLOW(GPIOC_PIN4) | PIN_OSPEED_VERYLOW(GPIOC_PIN5) | PIN_OSPEED_HIGH(GPIOC_LED_RED) | PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | PIN_OSPEED_VERYLOW(GPIOC_PIN10) | PIN_OSPEED_VERYLOW(GPIOC_PIN11) | PIN_OSPEED_VERYLOW(GPIOC_PIN12) | PIN_OSPEED_VERYLOW(GPIOC_PIN13) | PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | PIN_PUPDR_PULLUP(GPIOC_PIN1) | PIN_PUPDR_PULLUP(GPIOC_PIN2) | PIN_PUPDR_PULLUP(GPIOC_PIN3) | PIN_PUPDR_PULLUP(GPIOC_PIN4) | PIN_PUPDR_PULLUP(GPIOC_PIN5) | PIN_PUPDR_FLOATING(GPIOC_LED_RED) | PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | PIN_PUPDR_PULLUP(GPIOC_PIN10) | PIN_PUPDR_PULLUP(GPIOC_PIN11) | PIN_PUPDR_PULLUP(GPIOC_PIN12) | PIN_PUPDR_PULLUP(GPIOC_PIN13) | PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | PIN_ODR_HIGH(GPIOC_PIN1) | PIN_ODR_HIGH(GPIOC_PIN2) | PIN_ODR_HIGH(GPIOC_PIN3) | PIN_ODR_HIGH(GPIOC_PIN4) | PIN_ODR_HIGH(GPIOC_PIN5) | PIN_ODR_LOW(GPIOC_LED_RED) | PIN_ODR_LOW(GPIOC_LED_BLUE) | PIN_ODR_LOW(GPIOC_LED_ORANGE) | PIN_ODR_LOW(GPIOC_LED_GREEN) | PIN_ODR_HIGH(GPIOC_PIN10) | PIN_ODR_HIGH(GPIOC_PIN11) | PIN_ODR_HIGH(GPIOC_PIN12) | PIN_ODR_HIGH(GPIOC_PIN13) | PIN_ODR_HIGH(GPIOC_OSC32_IN) | PIN_ODR_HIGH(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | PIN_AFIO_AF(GPIOC_PIN1, 0U) | PIN_AFIO_AF(GPIOC_PIN2, 0U) | PIN_AFIO_AF(GPIOC_PIN3, 0U) | PIN_AFIO_AF(GPIOC_PIN4, 0U) | PIN_AFIO_AF(GPIOC_PIN5, 0U) | PIN_AFIO_AF(GPIOC_LED_RED, 0U) | PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
|
||||
#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | PIN_AFIO_AF(GPIOC_PIN10, 0U) | PIN_AFIO_AF(GPIOC_PIN11, 0U) | PIN_AFIO_AF(GPIOC_PIN12, 0U) | PIN_AFIO_AF(GPIOC_PIN13, 0U) | PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
|
||||
|
||||
/*
|
||||
* GPIOD setup:
|
||||
*
|
||||
* PD0 - PIN0 (input pullup).
|
||||
* PD1 - PIN1 (input pullup).
|
||||
* PD2 - PIN2 (input pullup).
|
||||
* PD3 - PIN3 (input pullup).
|
||||
* PD4 - PIN4 (input pullup).
|
||||
* PD5 - PIN5 (input pullup).
|
||||
* PD6 - PIN6 (input pullup).
|
||||
* PD7 - PIN7 (input pullup).
|
||||
* PD8 - PIN8 (input pullup).
|
||||
* PD9 - PIN9 (input pullup).
|
||||
* PD10 - PIN10 (input pullup).
|
||||
* PD11 - PIN11 (input pullup).
|
||||
* PD12 - PIN12 (input pullup).
|
||||
* PD13 - PIN13 (input pullup).
|
||||
* PD14 - PIN14 (input pullup).
|
||||
* PD15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | PIN_MODE_INPUT(GPIOD_PIN1) | PIN_MODE_INPUT(GPIOD_PIN2) | PIN_MODE_INPUT(GPIOD_PIN3) | PIN_MODE_INPUT(GPIOD_PIN4) | PIN_MODE_INPUT(GPIOD_PIN5) | PIN_MODE_INPUT(GPIOD_PIN6) | PIN_MODE_INPUT(GPIOD_PIN7) | PIN_MODE_INPUT(GPIOD_PIN8) | PIN_MODE_INPUT(GPIOD_PIN9) | PIN_MODE_INPUT(GPIOD_PIN10) | PIN_MODE_INPUT(GPIOD_PIN11) | PIN_MODE_INPUT(GPIOD_PIN12) | PIN_MODE_INPUT(GPIOD_PIN13) | PIN_MODE_INPUT(GPIOD_PIN14) | PIN_MODE_INPUT(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | PIN_OSPEED_VERYLOW(GPIOD_PIN1) | PIN_OSPEED_VERYLOW(GPIOD_PIN2) | PIN_OSPEED_VERYLOW(GPIOD_PIN3) | PIN_OSPEED_VERYLOW(GPIOD_PIN4) | PIN_OSPEED_VERYLOW(GPIOD_PIN5) | PIN_OSPEED_VERYLOW(GPIOD_PIN6) | PIN_OSPEED_VERYLOW(GPIOD_PIN7) | PIN_OSPEED_VERYLOW(GPIOD_PIN8) | PIN_OSPEED_VERYLOW(GPIOD_PIN9) | PIN_OSPEED_VERYLOW(GPIOD_PIN10) | PIN_OSPEED_VERYLOW(GPIOD_PIN11) | PIN_OSPEED_VERYLOW(GPIOD_PIN12) | PIN_OSPEED_VERYLOW(GPIOD_PIN13) | PIN_OSPEED_VERYLOW(GPIOD_PIN14) | PIN_OSPEED_VERYLOW(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | PIN_PUPDR_PULLUP(GPIOD_PIN1) | PIN_PUPDR_PULLUP(GPIOD_PIN2) | PIN_PUPDR_PULLUP(GPIOD_PIN3) | PIN_PUPDR_PULLUP(GPIOD_PIN4) | PIN_PUPDR_PULLUP(GPIOD_PIN5) | PIN_PUPDR_PULLUP(GPIOD_PIN6) | PIN_PUPDR_PULLUP(GPIOD_PIN7) | PIN_PUPDR_PULLUP(GPIOD_PIN8) | PIN_PUPDR_PULLUP(GPIOD_PIN9) | PIN_PUPDR_PULLUP(GPIOD_PIN10) | PIN_PUPDR_PULLUP(GPIOD_PIN11) | PIN_PUPDR_PULLUP(GPIOD_PIN12) | PIN_PUPDR_PULLUP(GPIOD_PIN13) | PIN_PUPDR_PULLUP(GPIOD_PIN14) | PIN_PUPDR_PULLUP(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | PIN_ODR_HIGH(GPIOD_PIN1) | PIN_ODR_HIGH(GPIOD_PIN2) | PIN_ODR_HIGH(GPIOD_PIN3) | PIN_ODR_HIGH(GPIOD_PIN4) | PIN_ODR_HIGH(GPIOD_PIN5) | PIN_ODR_HIGH(GPIOD_PIN6) | PIN_ODR_HIGH(GPIOD_PIN7) | PIN_ODR_HIGH(GPIOD_PIN8) | PIN_ODR_HIGH(GPIOD_PIN9) | PIN_ODR_HIGH(GPIOD_PIN10) | PIN_ODR_HIGH(GPIOD_PIN11) | PIN_ODR_HIGH(GPIOD_PIN12) | PIN_ODR_HIGH(GPIOD_PIN13) | PIN_ODR_HIGH(GPIOD_PIN14) | PIN_ODR_HIGH(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | PIN_AFIO_AF(GPIOD_PIN1, 0U) | PIN_AFIO_AF(GPIOD_PIN2, 0U) | PIN_AFIO_AF(GPIOD_PIN3, 0U) | PIN_AFIO_AF(GPIOD_PIN4, 0U) | PIN_AFIO_AF(GPIOD_PIN5, 0U) | PIN_AFIO_AF(GPIOD_PIN6, 0U) | PIN_AFIO_AF(GPIOD_PIN7, 0U))
|
||||
#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | PIN_AFIO_AF(GPIOD_PIN9, 0U) | PIN_AFIO_AF(GPIOD_PIN10, 0U) | PIN_AFIO_AF(GPIOD_PIN11, 0U) | PIN_AFIO_AF(GPIOD_PIN12, 0U) | PIN_AFIO_AF(GPIOD_PIN13, 0U) | PIN_AFIO_AF(GPIOD_PIN14, 0U) | PIN_AFIO_AF(GPIOD_PIN15, 0U))
|
||||
|
||||
/*
|
||||
* GPIOE setup:
|
||||
*
|
||||
* PE0 - PIN0 (input pullup).
|
||||
* PE1 - PIN1 (input pullup).
|
||||
* PE2 - PIN2 (input pullup).
|
||||
* PE3 - PIN3 (input pullup).
|
||||
* PE4 - PIN4 (input pullup).
|
||||
* PE5 - PIN5 (input pullup).
|
||||
* PE6 - PIN6 (input pullup).
|
||||
* PE7 - PIN7 (input pullup).
|
||||
* PE8 - PIN8 (input pullup).
|
||||
* PE9 - PIN9 (input pullup).
|
||||
* PE10 - PIN10 (input pullup).
|
||||
* PE11 - PIN11 (input pullup).
|
||||
* PE12 - PIN12 (input pullup).
|
||||
* PE13 - PIN13 (input pullup).
|
||||
* PE14 - PIN14 (input pullup).
|
||||
* PE15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | PIN_MODE_INPUT(GPIOE_PIN1) | PIN_MODE_INPUT(GPIOE_PIN2) | PIN_MODE_INPUT(GPIOE_PIN3) | PIN_MODE_INPUT(GPIOE_PIN4) | PIN_MODE_INPUT(GPIOE_PIN5) | PIN_MODE_INPUT(GPIOE_PIN6) | PIN_MODE_INPUT(GPIOE_PIN7) | PIN_MODE_INPUT(GPIOE_PIN8) | PIN_MODE_INPUT(GPIOE_PIN9) | PIN_MODE_INPUT(GPIOE_PIN10) | PIN_MODE_INPUT(GPIOE_PIN11) | PIN_MODE_INPUT(GPIOE_PIN12) | PIN_MODE_INPUT(GPIOE_PIN13) | PIN_MODE_INPUT(GPIOE_PIN14) | PIN_MODE_INPUT(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | PIN_OSPEED_VERYLOW(GPIOE_PIN1) | PIN_OSPEED_VERYLOW(GPIOE_PIN2) | PIN_OSPEED_VERYLOW(GPIOE_PIN3) | PIN_OSPEED_VERYLOW(GPIOE_PIN4) | PIN_OSPEED_VERYLOW(GPIOE_PIN5) | PIN_OSPEED_VERYLOW(GPIOE_PIN6) | PIN_OSPEED_VERYLOW(GPIOE_PIN7) | PIN_OSPEED_VERYLOW(GPIOE_PIN8) | PIN_OSPEED_VERYLOW(GPIOE_PIN9) | PIN_OSPEED_VERYLOW(GPIOE_PIN10) | PIN_OSPEED_VERYLOW(GPIOE_PIN11) | PIN_OSPEED_VERYLOW(GPIOE_PIN12) | PIN_OSPEED_VERYLOW(GPIOE_PIN13) | PIN_OSPEED_VERYLOW(GPIOE_PIN14) | PIN_OSPEED_VERYLOW(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | PIN_PUPDR_PULLUP(GPIOE_PIN1) | PIN_PUPDR_PULLUP(GPIOE_PIN2) | PIN_PUPDR_PULLUP(GPIOE_PIN3) | PIN_PUPDR_PULLUP(GPIOE_PIN4) | PIN_PUPDR_PULLUP(GPIOE_PIN5) | PIN_PUPDR_PULLUP(GPIOE_PIN6) | PIN_PUPDR_PULLUP(GPIOE_PIN7) | PIN_PUPDR_PULLUP(GPIOE_PIN8) | PIN_PUPDR_PULLUP(GPIOE_PIN9) | PIN_PUPDR_PULLUP(GPIOE_PIN10) | PIN_PUPDR_PULLUP(GPIOE_PIN11) | PIN_PUPDR_PULLUP(GPIOE_PIN12) | PIN_PUPDR_PULLUP(GPIOE_PIN13) | PIN_PUPDR_PULLUP(GPIOE_PIN14) | PIN_PUPDR_PULLUP(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | PIN_ODR_HIGH(GPIOE_PIN1) | PIN_ODR_HIGH(GPIOE_PIN2) | PIN_ODR_HIGH(GPIOE_PIN3) | PIN_ODR_HIGH(GPIOE_PIN4) | PIN_ODR_HIGH(GPIOE_PIN5) | PIN_ODR_HIGH(GPIOE_PIN6) | PIN_ODR_HIGH(GPIOE_PIN7) | PIN_ODR_HIGH(GPIOE_PIN8) | PIN_ODR_HIGH(GPIOE_PIN9) | PIN_ODR_HIGH(GPIOE_PIN10) | PIN_ODR_HIGH(GPIOE_PIN11) | PIN_ODR_HIGH(GPIOE_PIN12) | PIN_ODR_HIGH(GPIOE_PIN13) | PIN_ODR_HIGH(GPIOE_PIN14) | PIN_ODR_HIGH(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | PIN_AFIO_AF(GPIOE_PIN1, 0U) | PIN_AFIO_AF(GPIOE_PIN2, 0U) | PIN_AFIO_AF(GPIOE_PIN3, 0U) | PIN_AFIO_AF(GPIOE_PIN4, 0U) | PIN_AFIO_AF(GPIOE_PIN5, 0U) | PIN_AFIO_AF(GPIOE_PIN6, 0U) | PIN_AFIO_AF(GPIOE_PIN7, 0U))
|
||||
#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | PIN_AFIO_AF(GPIOE_PIN9, 0U) | PIN_AFIO_AF(GPIOE_PIN10, 0U) | PIN_AFIO_AF(GPIOE_PIN11, 0U) | PIN_AFIO_AF(GPIOE_PIN12, 0U) | PIN_AFIO_AF(GPIOE_PIN13, 0U) | PIN_AFIO_AF(GPIOE_PIN14, 0U) | PIN_AFIO_AF(GPIOE_PIN15, 0U))
|
||||
|
||||
/*
|
||||
* GPIOF setup:
|
||||
*
|
||||
* PF0 - OSC_IN (input floating).
|
||||
* PF1 - OSC_OUT (input floating).
|
||||
* PF2 - PIN2 (input pullup).
|
||||
* PF3 - PIN3 (input pullup).
|
||||
* PF4 - PIN4 (input pullup).
|
||||
* PF5 - PIN5 (input pullup).
|
||||
* PF6 - PIN6 (input pullup).
|
||||
* PF7 - PIN7 (input pullup).
|
||||
* PF8 - PIN8 (input pullup).
|
||||
* PF9 - PIN9 (input pullup).
|
||||
* PF10 - PIN10 (input pullup).
|
||||
* PF11 - PIN11 (input pullup).
|
||||
* PF12 - PIN12 (input pullup).
|
||||
* PF13 - PIN13 (input pullup).
|
||||
* PF14 - PIN14 (input pullup).
|
||||
* PF15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | PIN_MODE_INPUT(GPIOF_OSC_OUT) | PIN_MODE_INPUT(GPIOF_PIN2) | PIN_MODE_INPUT(GPIOF_PIN3) | PIN_MODE_INPUT(GPIOF_PIN4) | PIN_MODE_INPUT(GPIOF_PIN5) | PIN_MODE_INPUT(GPIOF_PIN6) | PIN_MODE_INPUT(GPIOF_PIN7) | PIN_MODE_INPUT(GPIOF_PIN8) | PIN_MODE_INPUT(GPIOF_PIN9) | PIN_MODE_INPUT(GPIOF_PIN10) | PIN_MODE_INPUT(GPIOF_PIN11) | PIN_MODE_INPUT(GPIOF_PIN12) | PIN_MODE_INPUT(GPIOF_PIN13) | PIN_MODE_INPUT(GPIOF_PIN14) | PIN_MODE_INPUT(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | PIN_OSPEED_VERYLOW(GPIOF_PIN2) | PIN_OSPEED_VERYLOW(GPIOF_PIN3) | PIN_OSPEED_VERYLOW(GPIOF_PIN4) | PIN_OSPEED_VERYLOW(GPIOF_PIN5) | PIN_OSPEED_VERYLOW(GPIOF_PIN6) | PIN_OSPEED_VERYLOW(GPIOF_PIN7) | PIN_OSPEED_VERYLOW(GPIOF_PIN8) | PIN_OSPEED_VERYLOW(GPIOF_PIN9) | PIN_OSPEED_VERYLOW(GPIOF_PIN10) | PIN_OSPEED_VERYLOW(GPIOF_PIN11) | PIN_OSPEED_VERYLOW(GPIOF_PIN12) | PIN_OSPEED_VERYLOW(GPIOF_PIN13) | PIN_OSPEED_VERYLOW(GPIOF_PIN14) | PIN_OSPEED_VERYLOW(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | PIN_PUPDR_PULLUP(GPIOF_PIN2) | PIN_PUPDR_PULLUP(GPIOF_PIN3) | PIN_PUPDR_PULLUP(GPIOF_PIN4) | PIN_PUPDR_PULLUP(GPIOF_PIN5) | PIN_PUPDR_PULLUP(GPIOF_PIN6) | PIN_PUPDR_PULLUP(GPIOF_PIN7) | PIN_PUPDR_PULLUP(GPIOF_PIN8) | PIN_PUPDR_PULLUP(GPIOF_PIN9) | PIN_PUPDR_PULLUP(GPIOF_PIN10) | PIN_PUPDR_PULLUP(GPIOF_PIN11) | PIN_PUPDR_PULLUP(GPIOF_PIN12) | PIN_PUPDR_PULLUP(GPIOF_PIN13) | PIN_PUPDR_PULLUP(GPIOF_PIN14) | PIN_PUPDR_PULLUP(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | PIN_ODR_HIGH(GPIOF_OSC_OUT) | PIN_ODR_HIGH(GPIOF_PIN2) | PIN_ODR_HIGH(GPIOF_PIN3) | PIN_ODR_HIGH(GPIOF_PIN4) | PIN_ODR_HIGH(GPIOF_PIN5) | PIN_ODR_HIGH(GPIOF_PIN6) | PIN_ODR_HIGH(GPIOF_PIN7) | PIN_ODR_HIGH(GPIOF_PIN8) | PIN_ODR_HIGH(GPIOF_PIN9) | PIN_ODR_HIGH(GPIOF_PIN10) | PIN_ODR_HIGH(GPIOF_PIN11) | PIN_ODR_HIGH(GPIOF_PIN12) | PIN_ODR_HIGH(GPIOF_PIN13) | PIN_ODR_HIGH(GPIOF_PIN14) | PIN_ODR_HIGH(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | PIN_AFIO_AF(GPIOF_PIN2, 0U) | PIN_AFIO_AF(GPIOF_PIN3, 0U) | PIN_AFIO_AF(GPIOF_PIN4, 0U) | PIN_AFIO_AF(GPIOF_PIN5, 0U) | PIN_AFIO_AF(GPIOF_PIN6, 0U) | PIN_AFIO_AF(GPIOF_PIN7, 0U))
|
||||
#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | PIN_AFIO_AF(GPIOF_PIN9, 0U) | PIN_AFIO_AF(GPIOF_PIN10, 0U) | PIN_AFIO_AF(GPIOF_PIN11, 0U) | PIN_AFIO_AF(GPIOF_PIN12, 0U) | PIN_AFIO_AF(GPIOF_PIN13, 0U) | PIN_AFIO_AF(GPIOF_PIN14, 0U) | PIN_AFIO_AF(GPIOF_PIN15, 0U))
|
||||
|
||||
/*===========================================================================*/
|
||||
/* External declarations. */
|
||||
/*===========================================================================*/
|
||||
|
||||
#if !defined(_FROM_ASM_)
|
||||
# ifdef __cplusplus
|
||||
extern "C" {
|
||||
# endif
|
||||
void boardInit(void);
|
||||
# ifdef __cplusplus
|
||||
}
|
||||
# endif
|
||||
#endif /* _FROM_ASM_ */
|
||||
|
||||
#endif /* BOARD_H */
|
||||
@@ -1,8 +1,8 @@
|
||||
# List of all the board related files.
|
||||
BOARDSRC = $(BOARD_PATH)/board/board.c
|
||||
BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F072RB/board.c
|
||||
|
||||
# Required include directories
|
||||
BOARDINC = $(BOARD_PATH)/board
|
||||
BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F072RB
|
||||
|
||||
# Shared variables
|
||||
ALLCSRC += $(BOARDSRC)
|
||||
|
||||
@@ -0,0 +1,20 @@
|
||||
/* Copyright 2020 Nick Brassel (tzarc)
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include_next "board.h"
|
||||
|
||||
#undef STM32_HSE_BYPASS
|
||||
@@ -1,7 +1,5 @@
|
||||
/* Address for jumping to bootloader on STM32 chips. */
|
||||
/* It is chip dependent, the correct number can be looked up here (page 175):
|
||||
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
* This also requires a patch to chibios:
|
||||
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
*/
|
||||
#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
|
||||
|
||||
@@ -0,0 +1,20 @@
|
||||
/* Copyright 2020 Nick Brassel (tzarc)
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
|
||||
# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
|
||||
#endif
|
||||
@@ -0,0 +1,179 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef _MCUCONF_H_
|
||||
#define _MCUCONF_H_
|
||||
|
||||
/*
|
||||
* STM32F0xx drivers configuration.
|
||||
* The following settings override the default settings present in
|
||||
* the various device driver implementation headers.
|
||||
* Note that the settings for each driver only have effect if the whole
|
||||
* driver is enabled in halconf.h.
|
||||
*
|
||||
* IRQ priorities:
|
||||
* 3...0 Lowest...Highest.
|
||||
*
|
||||
* DMA priorities:
|
||||
* 0...3 Lowest...Highest.
|
||||
*/
|
||||
|
||||
#define STM32F0xx_MCUCONF
|
||||
// #define STM32F070xB
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_NO_INIT FALSE
|
||||
#define STM32_PVD_ENABLE FALSE
|
||||
#define STM32_PLS STM32_PLS_LEV0
|
||||
#define STM32_HSI_ENABLED TRUE
|
||||
#define STM32_HSI14_ENABLED TRUE
|
||||
#define STM32_HSI48_ENABLED FALSE
|
||||
#define STM32_LSI_ENABLED TRUE
|
||||
#define STM32_HSE_ENABLED FALSE
|
||||
#define STM32_LSE_ENABLED FALSE
|
||||
#define STM32_SW STM32_SW_PLL
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
|
||||
#define STM32_PREDIV_VALUE 1
|
||||
#define STM32_PLLMUL_VALUE 12
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_PPRE STM32_PPRE_DIV1
|
||||
#define STM32_ADCSW STM32_ADCSW_HSI14
|
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4
|
||||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
|
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4
|
||||
#define STM32_ADCSW STM32_ADCSW_HSI14
|
||||
#define STM32_USBSW STM32_USBSW_HSI48
|
||||
#define STM32_CECSW STM32_CECSW_HSI
|
||||
#define STM32_I2C1SW STM32_I2C1SW_HSI
|
||||
#define STM32_USART1SW STM32_USART1SW_PCLK
|
||||
#define STM32_RTCSEL STM32_RTCSEL_LSI
|
||||
|
||||
/*
|
||||
* IRQ system settings.
|
||||
*/
|
||||
#define STM32_IRQ_EXTI0_1_IRQ_PRIORITY 3
|
||||
#define STM32_IRQ_EXTI2_3_IRQ_PRIORITY 3
|
||||
#define STM32_IRQ_EXTI4_15_IRQ_PRIORITY 3
|
||||
#define STM32_IRQ_EXTI16_IRQ_PRIORITY 3
|
||||
#define STM32_IRQ_EXTI17_20_IRQ_PRIORITY 3
|
||||
#define STM32_IRQ_EXTI21_22_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* ADC driver system settings.
|
||||
*/
|
||||
#define STM32_ADC_USE_ADC1 FALSE
|
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
||||
#define STM32_ADC_IRQ_PRIORITY 2
|
||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
|
||||
|
||||
/*
|
||||
* GPT driver system settings.
|
||||
*/
|
||||
#define STM32_GPT_USE_TIM1 FALSE
|
||||
#define STM32_GPT_USE_TIM2 FALSE
|
||||
#define STM32_GPT_USE_TIM3 FALSE
|
||||
#define STM32_GPT_USE_TIM14 FALSE
|
||||
#define STM32_GPT_TIM1_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM2_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM3_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM14_IRQ_PRIORITY 2
|
||||
|
||||
/*
|
||||
* I2C driver system settings.
|
||||
*/
|
||||
#define STM32_I2C_USE_I2C1 FALSE
|
||||
#define STM32_I2C_USE_I2C2 FALSE
|
||||
#define STM32_I2C_BUSY_TIMEOUT 50
|
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 3
|
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 3
|
||||
#define STM32_I2C_USE_DMA TRUE
|
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 1
|
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 1
|
||||
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
|
||||
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
|
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ICU driver system settings.
|
||||
*/
|
||||
#define STM32_ICU_USE_TIM1 FALSE
|
||||
#define STM32_ICU_USE_TIM2 FALSE
|
||||
#define STM32_ICU_USE_TIM3 FALSE
|
||||
#define STM32_ICU_TIM1_IRQ_PRIORITY 3
|
||||
#define STM32_ICU_TIM2_IRQ_PRIORITY 3
|
||||
#define STM32_ICU_TIM3_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define STM32_PWM_USE_ADVANCED FALSE
|
||||
#define STM32_PWM_USE_TIM1 FALSE
|
||||
#define STM32_PWM_USE_TIM2 FALSE
|
||||
#define STM32_PWM_USE_TIM3 FALSE
|
||||
#define STM32_PWM_TIM1_IRQ_PRIORITY 3
|
||||
#define STM32_PWM_TIM2_IRQ_PRIORITY 3
|
||||
#define STM32_PWM_TIM3_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#define STM32_SERIAL_USE_USART1 FALSE
|
||||
#define STM32_SERIAL_USE_USART2 FALSE
|
||||
#define STM32_SERIAL_USART1_PRIORITY 3
|
||||
#define STM32_SERIAL_USART2_PRIORITY 3
|
||||
|
||||
/*
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#define STM32_SPI_USE_SPI1 FALSE
|
||||
#define STM32_SPI_USE_SPI2 FALSE
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 2
|
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 2
|
||||
#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
|
||||
#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
|
||||
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
|
||||
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
|
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ST driver system settings.
|
||||
*/
|
||||
#define STM32_ST_IRQ_PRIORITY 2
|
||||
#define STM32_ST_USE_TIMER 2
|
||||
|
||||
/*
|
||||
* UART driver system settings.
|
||||
*/
|
||||
#define STM32_UART_USE_USART1 FALSE
|
||||
#define STM32_UART_USE_USART2 FALSE
|
||||
#define STM32_UART_USART1_IRQ_PRIORITY 3
|
||||
#define STM32_UART_USART2_IRQ_PRIORITY 3
|
||||
#define STM32_UART_USART1_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART2_DMA_PRIORITY 0
|
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* USB driver system settings.
|
||||
*/
|
||||
#define STM32_USB_USE_USB1 TRUE
|
||||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
|
||||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
|
||||
|
||||
#endif /* _MCUCONF_H_ */
|
||||
@@ -1,7 +1,5 @@
|
||||
/* Address for jumping to bootloader on STM32 chips. */
|
||||
/* It is chip dependent, the correct number can be looked up here:
|
||||
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
* This also requires a patch to chibios:
|
||||
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
*/
|
||||
#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
|
||||
|
||||
@@ -15,4 +15,6 @@
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
|
||||
#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
|
||||
# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
|
||||
#endif
|
||||
|
||||
@@ -127,8 +127,8 @@
|
||||
* DAC driver system settings.
|
||||
*/
|
||||
#define STM32_DAC_DUAL_MODE FALSE
|
||||
#define STM32_DAC_USE_DAC1_CH1 TRUE
|
||||
#define STM32_DAC_USE_DAC1_CH2 TRUE
|
||||
#define STM32_DAC_USE_DAC1_CH1 FALSE
|
||||
#define STM32_DAC_USE_DAC1_CH2 FALSE
|
||||
#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
|
||||
@@ -141,10 +141,10 @@
|
||||
#define STM32_GPT_USE_TIM2 FALSE
|
||||
#define STM32_GPT_USE_TIM3 FALSE
|
||||
#define STM32_GPT_USE_TIM4 FALSE
|
||||
#define STM32_GPT_USE_TIM6 TRUE
|
||||
#define STM32_GPT_USE_TIM7 TRUE
|
||||
#define STM32_GPT_USE_TIM8 TRUE
|
||||
#define STM32_GPT_USE_TIM15 TRUE
|
||||
#define STM32_GPT_USE_TIM6 FALSE
|
||||
#define STM32_GPT_USE_TIM7 FALSE
|
||||
#define STM32_GPT_USE_TIM8 FALSE
|
||||
#define STM32_GPT_USE_TIM15 FALSE
|
||||
#define STM32_GPT_USE_TIM16 FALSE
|
||||
#define STM32_GPT_USE_TIM17 FALSE
|
||||
#define STM32_GPT_TIM1_IRQ_PRIORITY 7
|
||||
@@ -158,7 +158,7 @@
|
||||
/*
|
||||
* I2C driver system settings.
|
||||
*/
|
||||
#define STM32_I2C_USE_I2C1 TRUE
|
||||
#define STM32_I2C_USE_I2C1 FALSE
|
||||
#define STM32_I2C_USE_I2C2 FALSE
|
||||
#define STM32_I2C_BUSY_TIMEOUT 50
|
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 10
|
||||
@@ -189,8 +189,8 @@
|
||||
#define STM32_PWM_USE_ADVANCED FALSE
|
||||
#define STM32_PWM_USE_TIM1 FALSE
|
||||
#define STM32_PWM_USE_TIM2 FALSE
|
||||
#define STM32_PWM_USE_TIM3 TRUE
|
||||
#define STM32_PWM_USE_TIM4 TRUE
|
||||
#define STM32_PWM_USE_TIM3 FALSE
|
||||
#define STM32_PWM_USE_TIM4 FALSE
|
||||
#define STM32_PWM_USE_TIM8 FALSE
|
||||
#define STM32_PWM_USE_TIM15 FALSE
|
||||
#define STM32_PWM_USE_TIM16 FALSE
|
||||
@@ -213,7 +213,7 @@
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#define STM32_SERIAL_USE_USART1 FALSE
|
||||
#define STM32_SERIAL_USE_USART2 TRUE
|
||||
#define STM32_SERIAL_USE_USART2 FALSE
|
||||
#define STM32_SERIAL_USE_USART3 FALSE
|
||||
#define STM32_SERIAL_USE_UART4 FALSE
|
||||
#define STM32_SERIAL_USE_UART5 FALSE
|
||||
@@ -227,7 +227,7 @@
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#define STM32_SPI_USE_SPI1 FALSE
|
||||
#define STM32_SPI_USE_SPI2 TRUE
|
||||
#define STM32_SPI_USE_SPI2 FALSE
|
||||
#define STM32_SPI_USE_SPI3 FALSE
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
# List of all the board related files.
|
||||
BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_G431RB/board.c
|
||||
|
||||
# Required include directories
|
||||
BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_G431RB
|
||||
|
||||
# Shared variables
|
||||
ALLCSRC += $(BOARDSRC)
|
||||
ALLINC += $(BOARDINC)
|
||||
@@ -0,0 +1,23 @@
|
||||
/* Copyright 2018-2020 Nick Brassel (@tzarc)
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/* Address for jumping to bootloader on STM32 chips. */
|
||||
/* It is chip dependent, the correct number can be looked up here (page 175):
|
||||
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
* This also requires a patch to chibios:
|
||||
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
*/
|
||||
#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
|
||||
@@ -0,0 +1,307 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* STM32G4xx drivers configuration.
|
||||
* The following settings override the default settings present in
|
||||
* the various device driver implementation headers.
|
||||
* Note that the settings for each driver only have effect if the whole
|
||||
* driver is enabled in halconf.h.
|
||||
*
|
||||
* IRQ priorities:
|
||||
* 15...0 Lowest...Highest.
|
||||
*
|
||||
* DMA priorities:
|
||||
* 0...3 Lowest...Highest.
|
||||
*/
|
||||
|
||||
#ifndef MCUCONF_H
|
||||
#define MCUCONF_H
|
||||
|
||||
#define STM32G4xx_MCUCONF
|
||||
#define STM32G431_MCUCONF
|
||||
#define STM32G441_MCUCONF
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_NO_INIT FALSE
|
||||
#define STM32_VOS STM32_VOS_RANGE1
|
||||
#define STM32_PWR_CR2 (PWR_CR2_PLS_LEV0)
|
||||
#define STM32_PWR_CR3 (PWR_CR3_EIWF)
|
||||
#define STM32_PWR_CR4 (0U)
|
||||
#define STM32_HSI16_ENABLED TRUE
|
||||
#define STM32_HSI48_ENABLED TRUE
|
||||
#define STM32_HSE_ENABLED FALSE
|
||||
#define STM32_LSI_ENABLED TRUE
|
||||
#define STM32_LSE_ENABLED FALSE
|
||||
#define STM32_SW STM32_SW_PLLRCLK
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSI16
|
||||
#define STM32_PLLM_VALUE 4
|
||||
#define STM32_PLLN_VALUE 80
|
||||
#define STM32_PLLPDIV_VALUE 0
|
||||
#define STM32_PLLP_VALUE 7
|
||||
#define STM32_PLLQ_VALUE 8
|
||||
#define STM32_PLLR_VALUE 2
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_PPRE1 STM32_PPRE1_DIV1
|
||||
#define STM32_PPRE2 STM32_PPRE2_DIV1
|
||||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
|
||||
#define STM32_MCOPRE STM32_MCOPRE_DIV1
|
||||
#define STM32_LSCOSEL STM32_LSCOSEL_NOCLOCK
|
||||
|
||||
/*
|
||||
* Peripherals clock sources.
|
||||
*/
|
||||
#define STM32_USART1SEL STM32_USART1SEL_SYSCLK
|
||||
#define STM32_USART2SEL STM32_USART2SEL_SYSCLK
|
||||
#define STM32_USART3SEL STM32_USART3SEL_SYSCLK
|
||||
#define STM32_UART4SEL STM32_UART4SEL_SYSCLK
|
||||
#define STM32_LPUART1SEL STM32_LPUART1SEL_PCLK1
|
||||
#define STM32_I2C1SEL STM32_I2C1SEL_PCLK1
|
||||
#define STM32_I2C2SEL STM32_I2C2SEL_PCLK1
|
||||
#define STM32_I2C3SEL STM32_I2C3SEL_PCLK1
|
||||
#define STM32_LPTIM1SEL STM32_LPTIM1SEL_PCLK1
|
||||
#define STM32_SAI1SEL STM32_SAI1SEL_SYSCLK
|
||||
#define STM32_I2S23SEL STM32_I2S23SEL_SYSCLK
|
||||
#define STM32_FDCANSEL STM32_FDCANSEL_PCLK1
|
||||
#define STM32_CLK48SEL STM32_CLK48SEL_HSI48
|
||||
#define STM32_ADC12SEL STM32_ADC12SEL_PLLPCLK
|
||||
#define STM32_RTCSEL STM32_RTCSEL_NOCLOCK
|
||||
|
||||
/*
|
||||
* IRQ system settings.
|
||||
*/
|
||||
#define STM32_IRQ_EXTI0_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI1_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI2_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI3_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI4_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI5_9_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI10_15_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI164041_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI17_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI18_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI19_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI20_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI212229_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI30_32_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI33_PRIORITY 6
|
||||
|
||||
#define STM32_IRQ_FDCAN1_PRIORITY 10
|
||||
|
||||
#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7
|
||||
#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7
|
||||
#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7
|
||||
#define STM32_IRQ_TIM1_CC_PRIORITY 7
|
||||
#define STM32_IRQ_TIM2_PRIORITY 7
|
||||
#define STM32_IRQ_TIM3_PRIORITY 7
|
||||
#define STM32_IRQ_TIM4_PRIORITY 7
|
||||
#define STM32_IRQ_TIM6_PRIORITY 7
|
||||
#define STM32_IRQ_TIM7_PRIORITY 7
|
||||
#define STM32_IRQ_TIM8_UP_PRIORITY 7
|
||||
#define STM32_IRQ_TIM8_CC_PRIORITY 7
|
||||
|
||||
#define STM32_IRQ_USART1_PRIORITY 12
|
||||
#define STM32_IRQ_USART2_PRIORITY 12
|
||||
#define STM32_IRQ_USART3_PRIORITY 12
|
||||
#define STM32_IRQ_UART4_PRIORITY 12
|
||||
#define STM32_IRQ_LPUART1_PRIORITY 12
|
||||
|
||||
/*
|
||||
* ADC driver system settings.
|
||||
*/
|
||||
#define STM32_ADC_DUAL_MODE FALSE
|
||||
#define STM32_ADC_COMPACT_SAMPLES FALSE
|
||||
#define STM32_ADC_USE_ADC1 FALSE
|
||||
#define STM32_ADC_USE_ADC2 FALSE
|
||||
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC2_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC12_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV4
|
||||
#define STM32_ADC_ADC12_PRESC ADC_CCR_PRESC_DIV2
|
||||
|
||||
/*
|
||||
* CAN driver system settings.
|
||||
*/
|
||||
#define STM32_CAN_USE_FDCAN1 FALSE
|
||||
|
||||
/*
|
||||
* DAC driver system settings.
|
||||
*/
|
||||
#define STM32_DAC_DUAL_MODE FALSE
|
||||
#define STM32_DAC_USE_DAC1_CH1 FALSE
|
||||
#define STM32_DAC_USE_DAC1_CH2 FALSE
|
||||
#define STM32_DAC_USE_DAC3_CH1 FALSE
|
||||
#define STM32_DAC_USE_DAC3_CH2 FALSE
|
||||
#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC3_CH1_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC3_CH2_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC3_CH1_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC3_CH2_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_DAC_DAC3_CH1_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_DAC_DAC3_CH2_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
|
||||
/*
|
||||
* GPT driver system settings.
|
||||
*/
|
||||
#define STM32_GPT_USE_TIM1 FALSE
|
||||
#define STM32_GPT_USE_TIM2 FALSE
|
||||
#define STM32_GPT_USE_TIM3 FALSE
|
||||
#define STM32_GPT_USE_TIM4 FALSE
|
||||
#define STM32_GPT_USE_TIM6 FALSE
|
||||
#define STM32_GPT_USE_TIM7 FALSE
|
||||
#define STM32_GPT_USE_TIM8 FALSE
|
||||
#define STM32_GPT_USE_TIM15 FALSE
|
||||
#define STM32_GPT_USE_TIM16 FALSE
|
||||
#define STM32_GPT_USE_TIM17 FALSE
|
||||
|
||||
/*
|
||||
* I2C driver system settings.
|
||||
*/
|
||||
#define STM32_I2C_USE_I2C1 FALSE
|
||||
#define STM32_I2C_USE_I2C2 FALSE
|
||||
#define STM32_I2C_USE_I2C3 FALSE
|
||||
#define STM32_I2C_BUSY_TIMEOUT 50
|
||||
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C3_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 3
|
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 3
|
||||
#define STM32_I2C_I2C3_DMA_PRIORITY 3
|
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ICU driver system settings.
|
||||
*/
|
||||
#define STM32_ICU_USE_TIM1 FALSE
|
||||
#define STM32_ICU_USE_TIM2 FALSE
|
||||
#define STM32_ICU_USE_TIM3 FALSE
|
||||
#define STM32_ICU_USE_TIM4 FALSE
|
||||
#define STM32_ICU_USE_TIM8 FALSE
|
||||
#define STM32_ICU_USE_TIM15 FALSE
|
||||
|
||||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define STM32_PWM_USE_ADVANCED FALSE
|
||||
#define STM32_PWM_USE_TIM1 FALSE
|
||||
#define STM32_PWM_USE_TIM2 FALSE
|
||||
#define STM32_PWM_USE_TIM3 FALSE
|
||||
#define STM32_PWM_USE_TIM4 FALSE
|
||||
#define STM32_PWM_USE_TIM8 FALSE
|
||||
#define STM32_PWM_USE_TIM15 FALSE
|
||||
#define STM32_PWM_USE_TIM16 FALSE
|
||||
#define STM32_PWM_USE_TIM17 FALSE
|
||||
|
||||
/*
|
||||
* RTC driver system settings.
|
||||
*/
|
||||
|
||||
/*
|
||||
* SDC driver system settings.
|
||||
*/
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#define STM32_SERIAL_USE_USART1 FALSE
|
||||
#define STM32_SERIAL_USE_USART2 FALSE
|
||||
#define STM32_SERIAL_USE_USART3 FALSE
|
||||
#define STM32_SERIAL_USE_UART4 FALSE
|
||||
#define STM32_SERIAL_USE_LPUART1 FALSE
|
||||
|
||||
/*
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#define STM32_SPI_USE_SPI1 FALSE
|
||||
#define STM32_SPI_USE_SPI2 FALSE
|
||||
#define STM32_SPI_USE_SPI3 FALSE
|
||||
#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI3_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ST driver system settings.
|
||||
*/
|
||||
#define STM32_ST_IRQ_PRIORITY 8
|
||||
#define STM32_ST_USE_TIMER 2
|
||||
|
||||
/*
|
||||
* TRNG driver system settings.
|
||||
*/
|
||||
#define STM32_TRNG_USE_RNG1 FALSE
|
||||
|
||||
/*
|
||||
* UART driver system settings.
|
||||
*/
|
||||
#define STM32_UART_USE_USART1 FALSE
|
||||
#define STM32_UART_USE_USART2 FALSE
|
||||
#define STM32_UART_USE_USART3 FALSE
|
||||
#define STM32_UART_USE_UART4 FALSE
|
||||
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART1_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART2_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART3_DMA_PRIORITY 0
|
||||
#define STM32_UART_UART4_DMA_PRIORITY 0
|
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* USB driver system settings.
|
||||
*/
|
||||
#define STM32_USB_USE_USB1 TRUE
|
||||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
|
||||
#define STM32_USB_USB1_HP_IRQ_PRIORITY 5
|
||||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 6
|
||||
|
||||
/*
|
||||
* WDG driver system settings.
|
||||
*/
|
||||
#define STM32_WDG_USE_IWDG FALSE
|
||||
|
||||
#endif /* MCUCONF_H */
|
||||
@@ -0,0 +1,9 @@
|
||||
# List of all the board related files.
|
||||
BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_G474RE/board.c
|
||||
|
||||
# Required include directories
|
||||
BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_G474RE
|
||||
|
||||
# Shared variables
|
||||
ALLCSRC += $(BOARDSRC)
|
||||
ALLINC += $(BOARDINC)
|
||||
@@ -0,0 +1,30 @@
|
||||
/* Copyright 2020 Nick Brassel (tzarc)
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifndef STM32_BOOTLOADER_DUAL_BANK
|
||||
# define STM32_BOOTLOADER_DUAL_BANK FALSE
|
||||
#endif
|
||||
|
||||
// To Enter bootloader from `RESET` keycode, you'll need to dedicate a GPIO to
|
||||
// charge an RC network on the BOOT0 pin.
|
||||
// See the QMK Discord's #hardware channel pins for an example circuit.
|
||||
// Insert these two lines into your keyboard's `config.h` file.
|
||||
// In the case below, PB7 is selected to charge.
|
||||
#if 0
|
||||
#define STM32_BOOTLOADER_DUAL_BANK TRUE
|
||||
#define STM32_BOOTLOADER_DUAL_BANK_GPIO B7
|
||||
#endif
|
||||
@@ -0,0 +1,372 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* STM32G4xx drivers configuration.
|
||||
* The following settings override the default settings present in
|
||||
* the various device driver implementation headers.
|
||||
* Note that the settings for each driver only have effect if the whole
|
||||
* driver is enabled in halconf.h.
|
||||
*
|
||||
* IRQ priorities:
|
||||
* 15...0 Lowest...Highest.
|
||||
*
|
||||
* DMA priorities:
|
||||
* 0...3 Lowest...Highest.
|
||||
*/
|
||||
|
||||
#ifndef MCUCONF_H
|
||||
#define MCUCONF_H
|
||||
|
||||
#define STM32G4xx_MCUCONF
|
||||
#define STM32G473_MCUCONF
|
||||
#define STM32G483_MCUCONF
|
||||
#define STM32G474_MCUCONF
|
||||
#define STM32G484_MCUCONF
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_NO_INIT FALSE
|
||||
#define STM32_VOS STM32_VOS_RANGE1
|
||||
#define STM32_PWR_CR2 (PWR_CR2_PLS_LEV0)
|
||||
#define STM32_PWR_CR3 (PWR_CR3_EIWF)
|
||||
#define STM32_PWR_CR4 (0U)
|
||||
#define STM32_HSI16_ENABLED TRUE
|
||||
#define STM32_HSI48_ENABLED TRUE
|
||||
#define STM32_HSE_ENABLED FALSE
|
||||
#define STM32_LSI_ENABLED FALSE
|
||||
#define STM32_LSE_ENABLED FALSE
|
||||
#define STM32_SW STM32_SW_PLLRCLK
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSI16
|
||||
#define STM32_PLLM_VALUE 2
|
||||
#define STM32_PLLN_VALUE 40
|
||||
#define STM32_PLLPDIV_VALUE 0
|
||||
#define STM32_PLLP_VALUE 7
|
||||
#define STM32_PLLQ_VALUE 2
|
||||
#define STM32_PLLR_VALUE 2
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_PPRE1 STM32_PPRE1_DIV1
|
||||
#define STM32_PPRE2 STM32_PPRE2_DIV1
|
||||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
|
||||
#define STM32_MCOPRE STM32_MCOPRE_DIV1
|
||||
#define STM32_LSCOSEL STM32_LSCOSEL_NOCLOCK
|
||||
|
||||
/*
|
||||
* Peripherals clock sources.
|
||||
*/
|
||||
#define STM32_USART1SEL STM32_USART1SEL_SYSCLK
|
||||
#define STM32_USART2SEL STM32_USART2SEL_SYSCLK
|
||||
#define STM32_USART3SEL STM32_USART3SEL_SYSCLK
|
||||
#define STM32_UART4SEL STM32_UART4SEL_SYSCLK
|
||||
#define STM32_UART5SEL STM32_UART5SEL_SYSCLK
|
||||
#define STM32_LPUART1SEL STM32_LPUART1SEL_PCLK1
|
||||
#define STM32_I2C1SEL STM32_I2C1SEL_PCLK1
|
||||
#define STM32_I2C2SEL STM32_I2C2SEL_PCLK1
|
||||
#define STM32_I2C3SEL STM32_I2C3SEL_PCLK1
|
||||
#define STM32_I2C4SEL STM32_I2C4SEL_PCLK1
|
||||
#define STM32_LPTIM1SEL STM32_LPTIM1SEL_PCLK1
|
||||
#define STM32_SAI1SEL STM32_SAI1SEL_SYSCLK
|
||||
#define STM32_I2S23SEL STM32_I2S23SEL_SYSCLK
|
||||
#define STM32_FDCANSEL STM32_FDCANSEL_HSE
|
||||
#define STM32_CLK48SEL STM32_CLK48SEL_HSI48
|
||||
#define STM32_ADC12SEL STM32_ADC12SEL_PLLPCLK
|
||||
#define STM32_ADC345SEL STM32_ADC345SEL_PLLPCLK
|
||||
#define STM32_QSPISEL STM32_QSPISEL_SYSCLK
|
||||
#define STM32_RTCSEL STM32_RTCSEL_NOCLOCK
|
||||
|
||||
/*
|
||||
* IRQ system settings.
|
||||
*/
|
||||
#define STM32_IRQ_EXTI0_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI1_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI2_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI3_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI4_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI5_9_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI10_15_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI164041_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI17_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI18_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI19_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI20_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI212229_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI30_32_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI33_PRIORITY 6
|
||||
|
||||
#define STM32_IRQ_FDCAN1_PRIORITY 10
|
||||
#define STM32_IRQ_FDCAN2_PRIORITY 10
|
||||
#define STM32_IRQ_FDCAN3_PRIORITY 10
|
||||
|
||||
#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7
|
||||
#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7
|
||||
#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7
|
||||
#define STM32_IRQ_TIM1_CC_PRIORITY 7
|
||||
#define STM32_IRQ_TIM2_PRIORITY 7
|
||||
#define STM32_IRQ_TIM3_PRIORITY 7
|
||||
#define STM32_IRQ_TIM4_PRIORITY 7
|
||||
#define STM32_IRQ_TIM5_PRIORITY 7
|
||||
#define STM32_IRQ_TIM6_PRIORITY 7
|
||||
#define STM32_IRQ_TIM7_PRIORITY 7
|
||||
#define STM32_IRQ_TIM8_UP_PRIORITY 7
|
||||
#define STM32_IRQ_TIM8_CC_PRIORITY 7
|
||||
#define STM32_IRQ_TIM20_UP_PRIORITY 7
|
||||
#define STM32_IRQ_TIM20_CC_PRIORITY 7
|
||||
|
||||
#define STM32_IRQ_USART1_PRIORITY 12
|
||||
#define STM32_IRQ_USART2_PRIORITY 12
|
||||
#define STM32_IRQ_USART3_PRIORITY 12
|
||||
#define STM32_IRQ_UART4_PRIORITY 12
|
||||
#define STM32_IRQ_UART5_PRIORITY 12
|
||||
#define STM32_IRQ_LPUART1_PRIORITY 12
|
||||
|
||||
/*
|
||||
* ADC driver system settings.
|
||||
*/
|
||||
#define STM32_ADC_DUAL_MODE FALSE
|
||||
#define STM32_ADC_COMPACT_SAMPLES FALSE
|
||||
#define STM32_ADC_USE_ADC1 FALSE
|
||||
#define STM32_ADC_USE_ADC2 FALSE
|
||||
#define STM32_ADC_USE_ADC3 FALSE
|
||||
#define STM32_ADC_USE_ADC4 FALSE
|
||||
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC2_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC3_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC4_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC12_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC3_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC4_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV4
|
||||
#define STM32_ADC_ADC345_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV4
|
||||
#define STM32_ADC_ADC12_PRESC ADC_CCR_PRESC_DIV2
|
||||
#define STM32_ADC_ADC345_PRESC ADC_CCR_PRESC_DIV2
|
||||
|
||||
/*
|
||||
* CAN driver system settings.
|
||||
*/
|
||||
#define STM32_CAN_USE_FDCAN1 FALSE
|
||||
#define STM32_CAN_USE_FDCAN2 FALSE
|
||||
#define STM32_CAN_USE_FDCAN3 FALSE
|
||||
|
||||
/*
|
||||
* DAC driver system settings.
|
||||
*/
|
||||
#define STM32_DAC_DUAL_MODE FALSE
|
||||
#define STM32_DAC_USE_DAC1_CH1 FALSE
|
||||
#define STM32_DAC_USE_DAC1_CH2 FALSE
|
||||
#define STM32_DAC_USE_DAC2_CH1 FALSE
|
||||
#define STM32_DAC_USE_DAC3_CH1 FALSE
|
||||
#define STM32_DAC_USE_DAC3_CH2 FALSE
|
||||
#define STM32_DAC_USE_DAC4_CH1 FALSE
|
||||
#define STM32_DAC_USE_DAC4_CH2 FALSE
|
||||
#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC2_CH1_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC3_CH1_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC3_CH2_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC4_CH1_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC4_CH2_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC2_CH1_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC3_CH1_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC3_CH2_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC4_CH1_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC4_CH2_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_DAC_DAC2_CH1_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_DAC_DAC3_CH1_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_DAC_DAC3_CH2_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_DAC_DAC4_CH1_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_DAC_DAC4_CH2_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
|
||||
/*
|
||||
* GPT driver system settings.
|
||||
*/
|
||||
#define STM32_GPT_USE_TIM1 FALSE
|
||||
#define STM32_GPT_USE_TIM2 FALSE
|
||||
#define STM32_GPT_USE_TIM3 FALSE
|
||||
#define STM32_GPT_USE_TIM4 FALSE
|
||||
#define STM32_GPT_USE_TIM5 FALSE
|
||||
#define STM32_GPT_USE_TIM6 FALSE
|
||||
#define STM32_GPT_USE_TIM7 FALSE
|
||||
#define STM32_GPT_USE_TIM8 FALSE
|
||||
#define STM32_GPT_USE_TIM15 FALSE
|
||||
#define STM32_GPT_USE_TIM16 FALSE
|
||||
#define STM32_GPT_USE_TIM17 FALSE
|
||||
|
||||
/*
|
||||
* I2C driver system settings.
|
||||
*/
|
||||
#define STM32_I2C_USE_I2C1 FALSE
|
||||
#define STM32_I2C_USE_I2C2 FALSE
|
||||
#define STM32_I2C_USE_I2C3 FALSE
|
||||
#define STM32_I2C_USE_I2C4 FALSE
|
||||
#define STM32_I2C_BUSY_TIMEOUT 50
|
||||
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C4_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C4_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C3_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C4_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 3
|
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 3
|
||||
#define STM32_I2C_I2C3_DMA_PRIORITY 3
|
||||
#define STM32_I2C_I2C4_DMA_PRIORITY 3
|
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ICU driver system settings.
|
||||
*/
|
||||
#define STM32_ICU_USE_TIM1 FALSE
|
||||
#define STM32_ICU_USE_TIM2 FALSE
|
||||
#define STM32_ICU_USE_TIM3 FALSE
|
||||
#define STM32_ICU_USE_TIM4 FALSE
|
||||
#define STM32_ICU_USE_TIM5 FALSE
|
||||
#define STM32_ICU_USE_TIM8 FALSE
|
||||
#define STM32_ICU_USE_TIM15 FALSE
|
||||
#define STM32_ICU_USE_TIM16 FALSE
|
||||
#define STM32_ICU_USE_TIM17 FALSE
|
||||
|
||||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define STM32_PWM_USE_ADVANCED FALSE
|
||||
#define STM32_PWM_USE_TIM1 FALSE
|
||||
#define STM32_PWM_USE_TIM2 FALSE
|
||||
#define STM32_PWM_USE_TIM3 FALSE
|
||||
#define STM32_PWM_USE_TIM4 FALSE
|
||||
#define STM32_PWM_USE_TIM5 FALSE
|
||||
#define STM32_PWM_USE_TIM8 FALSE
|
||||
#define STM32_PWM_USE_TIM15 FALSE
|
||||
#define STM32_PWM_USE_TIM16 FALSE
|
||||
#define STM32_PWM_USE_TIM17 FALSE
|
||||
#define STM32_PWM_USE_TIM20 FALSE
|
||||
|
||||
/*
|
||||
* RTC driver system settings.
|
||||
*/
|
||||
|
||||
/*
|
||||
* SDC driver system settings.
|
||||
*/
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#define STM32_SERIAL_USE_USART1 FALSE
|
||||
#define STM32_SERIAL_USE_USART2 FALSE
|
||||
#define STM32_SERIAL_USE_USART3 FALSE
|
||||
#define STM32_SERIAL_USE_UART4 FALSE
|
||||
#define STM32_SERIAL_USE_UART5 FALSE
|
||||
#define STM32_SERIAL_USE_LPUART1 FALSE
|
||||
|
||||
/*
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#define STM32_SPI_USE_SPI1 FALSE
|
||||
#define STM32_SPI_USE_SPI2 FALSE
|
||||
#define STM32_SPI_USE_SPI3 FALSE
|
||||
#define STM32_SPI_USE_SPI4 FALSE
|
||||
#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI4_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI4_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI3_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI4_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI4_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ST driver system settings.
|
||||
*/
|
||||
#define STM32_ST_IRQ_PRIORITY 8
|
||||
#define STM32_ST_USE_TIMER 2
|
||||
|
||||
/*
|
||||
* TRNG driver system settings.
|
||||
*/
|
||||
#define STM32_TRNG_USE_RNG1 FALSE
|
||||
|
||||
/*
|
||||
* UART driver system settings.
|
||||
*/
|
||||
#define STM32_UART_USE_USART1 FALSE
|
||||
#define STM32_UART_USE_USART2 FALSE
|
||||
#define STM32_UART_USE_USART3 FALSE
|
||||
#define STM32_UART_USE_UART4 FALSE
|
||||
#define STM32_UART_USE_UART5 FALSE
|
||||
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY
|
||||
#define STM32_UART_USART1_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART2_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART3_DMA_PRIORITY 0
|
||||
#define STM32_UART_UART4_DMA_PRIORITY 0
|
||||
#define STM32_UART_UART5_DMA_PRIORITY 0
|
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* USB driver system settings.
|
||||
*/
|
||||
#define STM32_USB_USE_USB1 TRUE
|
||||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
|
||||
#define STM32_USB_USB1_HP_IRQ_PRIORITY 5
|
||||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 5
|
||||
|
||||
/*
|
||||
* WDG driver system settings.
|
||||
*/
|
||||
#define STM32_WDG_USE_IWDG FALSE
|
||||
|
||||
/*
|
||||
* WSPI driver system settings.
|
||||
*/
|
||||
#define STM32_WSPI_USE_QUADSPI1 FALSE
|
||||
#define STM32_WSPI_QUADSPI1_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
|
||||
|
||||
#endif /* MCUCONF_H */
|
||||
@@ -13,7 +13,7 @@
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
#include "hal.h"
|
||||
#include <hal.h>
|
||||
|
||||
#if HAL_USE_PAL || defined(__DOXYGEN__)
|
||||
/**
|
||||
|
||||
@@ -0,0 +1,9 @@
|
||||
# List of all the board related files.
|
||||
BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.c
|
||||
|
||||
# Required include directories
|
||||
BOARDINC = $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY
|
||||
|
||||
# Shared variables
|
||||
ALLCSRC += $(BOARDSRC)
|
||||
ALLINC += $(BOARDINC)
|
||||
@@ -0,0 +1,37 @@
|
||||
/* Copyright 2020 Nick Brassel (tzarc)
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include_next "board.h"
|
||||
|
||||
#undef STM32_HSE_BYPASS
|
||||
|
||||
/*
|
||||
* USB bus activation macro, required by the USB driver.
|
||||
*/
|
||||
#define usb_lld_connect_bus(usbp) \
|
||||
do { \
|
||||
palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_ALTERNATE(14)); \
|
||||
} while (0)
|
||||
|
||||
/*
|
||||
* USB bus de-activation macro, required by the USB driver.
|
||||
*/
|
||||
#define usb_lld_disconnect_bus(usbp) \
|
||||
do { \
|
||||
palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_OUTPUT_PUSHPULL); \
|
||||
palClearPad(GPIOA, GPIOA_USB_DP); \
|
||||
} while (0)
|
||||
@@ -0,0 +1,7 @@
|
||||
/* Address for jumping to bootloader on STM32 chips. */
|
||||
/* It is chip dependent, the correct number can be looked up here:
|
||||
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
* This also requires a patch to chibios:
|
||||
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
*/
|
||||
#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800
|
||||
+65
-23
@@ -29,7 +29,7 @@
|
||||
#define CHCONF_H
|
||||
|
||||
#define _CHIBIOS_RT_CONF_
|
||||
#define _CHIBIOS_RT_CONF_VER_6_0_
|
||||
#define _CHIBIOS_RT_CONF_VER_6_1_
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
@@ -108,21 +108,6 @@
|
||||
#define CH_CFG_TIME_QUANTUM 0
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Managed RAM size.
|
||||
* @details Size of the RAM area to be managed by the OS. If set to zero
|
||||
* then the whole available RAM is used. The core memory is made
|
||||
* available to the heap allocator and/or can be used directly through
|
||||
* the simplified core memory allocator.
|
||||
*
|
||||
* @note In order to let the OS manage the whole RAM the linker script must
|
||||
* provide the @p __heap_base__ and @p __heap_end__ symbols.
|
||||
* @note Requires @p CH_CFG_USE_MEMCORE.
|
||||
*/
|
||||
#if !defined(CH_CFG_MEMCORE_SIZE)
|
||||
#define CH_CFG_MEMCORE_SIZE 0
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Idle thread automatic spawn suppression.
|
||||
* @details When this option is activated the function @p chSysInit()
|
||||
@@ -311,6 +296,28 @@
|
||||
#define CH_CFG_USE_MESSAGES_PRIORITY TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Dynamic Threads APIs.
|
||||
* @details If enabled then the dynamic threads creation APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_WAITEXIT.
|
||||
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_DYNAMIC)
|
||||
#define CH_CFG_USE_DYNAMIC TRUE
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name OSLIB options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Mailboxes APIs.
|
||||
* @details If enabled then the asynchronous messages (mailboxes) APIs are
|
||||
@@ -334,6 +341,21 @@
|
||||
#define CH_CFG_USE_MEMCORE TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Managed RAM size.
|
||||
* @details Size of the RAM area to be managed by the OS. If set to zero
|
||||
* then the whole available RAM is used. The core memory is made
|
||||
* available to the heap allocator and/or can be used directly through
|
||||
* the simplified core memory allocator.
|
||||
*
|
||||
* @note In order to let the OS manage the whole RAM the linker script must
|
||||
* provide the @p __heap_base__ and @p __heap_end__ symbols.
|
||||
* @note Requires @p CH_CFG_USE_MEMCORE.
|
||||
*/
|
||||
#if !defined(CH_CFG_MEMCORE_SIZE)
|
||||
#define CH_CFG_MEMCORE_SIZE 0
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Heap Allocator APIs.
|
||||
* @details If enabled then the memory heap allocator APIs are included
|
||||
@@ -382,16 +404,36 @@
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Dynamic Threads APIs.
|
||||
* @details If enabled then the dynamic threads creation APIs are included
|
||||
* @brief Objects Caches APIs.
|
||||
* @details If enabled then the objects caches APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_WAITEXIT.
|
||||
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_DYNAMIC)
|
||||
#define CH_CFG_USE_DYNAMIC TRUE
|
||||
#if !defined(CH_CFG_USE_OBJ_CACHES)
|
||||
#define CH_CFG_USE_OBJ_CACHES FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Delegate threads APIs.
|
||||
* @details If enabled then the delegate threads APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_DELEGATES)
|
||||
#define CH_CFG_USE_DELEGATES FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Jobs Queues APIs.
|
||||
* @details If enabled then the jobs queues APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_JOBS)
|
||||
#define CH_CFG_USE_JOBS FALSE
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
@@ -411,7 +453,7 @@
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_FACTORY)
|
||||
#define CH_CFG_USE_FACTORY TRUE
|
||||
#define CH_CFG_USE_FACTORY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -0,0 +1,20 @@
|
||||
/* Copyright 2020 Nick Brassel (tzarc)
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP
|
||||
# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
|
||||
#endif
|
||||
+9
-3
@@ -29,9 +29,9 @@
|
||||
#define HALCONF_H
|
||||
|
||||
#define _CHIBIOS_HAL_CONF_
|
||||
#define _CHIBIOS_HAL_CONF_VER_7_0_
|
||||
#define _CHIBIOS_HAL_CONF_VER_7_1_
|
||||
|
||||
#include "mcuconf.h"
|
||||
#include <mcuconf.h>
|
||||
|
||||
/**
|
||||
* @brief Enables the PAL subsystem.
|
||||
@@ -68,6 +68,13 @@
|
||||
#define HAL_USE_DAC TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the EFlash subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_EFL) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_EFL FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the GPT subsystem.
|
||||
*/
|
||||
@@ -451,7 +458,6 @@
|
||||
#define SPI_USE_CIRCULAR FALSE
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
@@ -0,0 +1,273 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef MCUCONF_H
|
||||
#define MCUCONF_H
|
||||
|
||||
/*
|
||||
* STM32F3xx drivers configuration.
|
||||
* The following settings override the default settings present in
|
||||
* the various device driver implementation headers.
|
||||
* Note that the settings for each driver only have effect if the whole
|
||||
* driver is enabled in halconf.h.
|
||||
*
|
||||
* IRQ priorities:
|
||||
* 15...0 Lowest...Highest.
|
||||
*
|
||||
* DMA priorities:
|
||||
* 0...3 Lowest...Highest.
|
||||
*/
|
||||
|
||||
#define STM32F3xx_MCUCONF
|
||||
#define STM32F303_MCUCONF
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_NO_INIT FALSE
|
||||
#define STM32_PVD_ENABLE FALSE
|
||||
#define STM32_PLS STM32_PLS_LEV0
|
||||
#define STM32_HSI_ENABLED TRUE
|
||||
#define STM32_LSI_ENABLED TRUE
|
||||
#define STM32_HSE_ENABLED TRUE
|
||||
#define STM32_LSE_ENABLED FALSE
|
||||
#define STM32_SW STM32_SW_PLL
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSE
|
||||
#define STM32_PREDIV_VALUE 1
|
||||
#define STM32_PLLMUL_VALUE 9
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_PPRE1 STM32_PPRE1_DIV2
|
||||
#define STM32_PPRE2 STM32_PPRE2_DIV2
|
||||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
|
||||
#define STM32_ADC12PRES STM32_ADC12PRES_DIV1
|
||||
#define STM32_ADC34PRES STM32_ADC34PRES_DIV1
|
||||
#define STM32_USART1SW STM32_USART1SW_PCLK
|
||||
#define STM32_USART2SW STM32_USART2SW_PCLK
|
||||
#define STM32_USART3SW STM32_USART3SW_PCLK
|
||||
#define STM32_UART4SW STM32_UART4SW_PCLK
|
||||
#define STM32_UART5SW STM32_UART5SW_PCLK
|
||||
#define STM32_I2C1SW STM32_I2C1SW_SYSCLK
|
||||
#define STM32_I2C2SW STM32_I2C2SW_SYSCLK
|
||||
#define STM32_TIM1SW STM32_TIM1SW_PCLK2
|
||||
#define STM32_TIM8SW STM32_TIM8SW_PCLK2
|
||||
#define STM32_RTCSEL STM32_RTCSEL_LSI
|
||||
#define STM32_USB_CLOCK_REQUIRED TRUE
|
||||
#define STM32_USBPRE STM32_USBPRE_DIV1P5
|
||||
|
||||
/*
|
||||
* IRQ system settings.
|
||||
*/
|
||||
#define STM32_IRQ_EXTI0_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI1_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI2_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI3_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI4_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI5_9_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI10_15_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI16_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI17_PRIORITY 15
|
||||
#define STM32_IRQ_EXTI18_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI19_PRIORITY 15
|
||||
#define STM32_IRQ_EXTI20_PRIORITY 15
|
||||
#define STM32_IRQ_EXTI21_22_29_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI30_32_PRIORITY 6
|
||||
#define STM32_IRQ_EXTI33_PRIORITY 6
|
||||
#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7
|
||||
#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7
|
||||
#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7
|
||||
#define STM32_IRQ_TIM1_CC_PRIORITY 7
|
||||
|
||||
/*
|
||||
* ADC driver system settings.
|
||||
*/
|
||||
#define STM32_ADC_DUAL_MODE FALSE
|
||||
#define STM32_ADC_COMPACT_SAMPLES FALSE
|
||||
#define STM32_ADC_USE_ADC1 FALSE
|
||||
#define STM32_ADC_USE_ADC2 FALSE
|
||||
#define STM32_ADC_USE_ADC3 FALSE
|
||||
#define STM32_ADC_USE_ADC4 FALSE
|
||||
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
|
||||
#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
|
||||
#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
|
||||
#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
|
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC2_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC3_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC4_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC12_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC3_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC4_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5
|
||||
#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
|
||||
#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1
|
||||
|
||||
/*
|
||||
* CAN driver system settings.
|
||||
*/
|
||||
#define STM32_CAN_USE_CAN1 FALSE
|
||||
#define STM32_CAN_CAN1_IRQ_PRIORITY 11
|
||||
|
||||
/*
|
||||
* DAC driver system settings.
|
||||
*/
|
||||
#define STM32_DAC_DUAL_MODE FALSE
|
||||
#define STM32_DAC_USE_DAC1_CH1 TRUE
|
||||
#define STM32_DAC_USE_DAC1_CH2 TRUE
|
||||
#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10
|
||||
#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2
|
||||
#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2
|
||||
|
||||
/*
|
||||
* GPT driver system settings.
|
||||
*/
|
||||
#define STM32_GPT_USE_TIM1 FALSE
|
||||
#define STM32_GPT_USE_TIM2 FALSE
|
||||
#define STM32_GPT_USE_TIM3 FALSE
|
||||
#define STM32_GPT_USE_TIM4 FALSE
|
||||
#define STM32_GPT_USE_TIM6 TRUE
|
||||
#define STM32_GPT_USE_TIM7 TRUE
|
||||
#define STM32_GPT_USE_TIM8 TRUE
|
||||
#define STM32_GPT_USE_TIM15 TRUE
|
||||
#define STM32_GPT_USE_TIM16 FALSE
|
||||
#define STM32_GPT_USE_TIM17 FALSE
|
||||
#define STM32_GPT_TIM1_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM2_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM3_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM4_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM6_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM7_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM8_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* I2C driver system settings.
|
||||
*/
|
||||
#define STM32_I2C_USE_I2C1 TRUE
|
||||
#define STM32_I2C_USE_I2C2 FALSE
|
||||
#define STM32_I2C_BUSY_TIMEOUT 50
|
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 10
|
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 10
|
||||
#define STM32_I2C_USE_DMA TRUE
|
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 1
|
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 1
|
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ICU driver system settings.
|
||||
*/
|
||||
#define STM32_ICU_USE_TIM1 FALSE
|
||||
#define STM32_ICU_USE_TIM2 FALSE
|
||||
#define STM32_ICU_USE_TIM3 FALSE
|
||||
#define STM32_ICU_USE_TIM4 FALSE
|
||||
#define STM32_ICU_USE_TIM8 FALSE
|
||||
#define STM32_ICU_USE_TIM15 FALSE
|
||||
#define STM32_ICU_TIM1_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM2_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM3_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM4_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM8_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define STM32_PWM_USE_ADVANCED FALSE
|
||||
#define STM32_PWM_USE_TIM1 FALSE
|
||||
#define STM32_PWM_USE_TIM2 FALSE
|
||||
#define STM32_PWM_USE_TIM3 TRUE
|
||||
#define STM32_PWM_USE_TIM4 TRUE
|
||||
#define STM32_PWM_USE_TIM8 FALSE
|
||||
#define STM32_PWM_USE_TIM15 FALSE
|
||||
#define STM32_PWM_USE_TIM16 FALSE
|
||||
#define STM32_PWM_USE_TIM17 FALSE
|
||||
#define STM32_PWM_TIM1_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM2_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM3_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM4_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM8_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* RTC driver system settings.
|
||||
*/
|
||||
#define STM32_RTC_PRESA_VALUE 32
|
||||
#define STM32_RTC_PRESS_VALUE 1024
|
||||
#define STM32_RTC_CR_INIT 0
|
||||
#define STM32_RTC_TAMPCR_INIT 0
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#define STM32_SERIAL_USE_USART1 TRUE
|
||||
#define STM32_SERIAL_USE_USART2 FALSE
|
||||
#define STM32_SERIAL_USE_USART3 FALSE
|
||||
#define STM32_SERIAL_USE_UART4 FALSE
|
||||
#define STM32_SERIAL_USE_UART5 FALSE
|
||||
#define STM32_SERIAL_USART1_PRIORITY 12
|
||||
#define STM32_SERIAL_USART2_PRIORITY 12
|
||||
#define STM32_SERIAL_USART3_PRIORITY 12
|
||||
#define STM32_SERIAL_UART4_PRIORITY 12
|
||||
#define STM32_SERIAL_UART5_PRIORITY 12
|
||||
|
||||
/*
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#define STM32_SPI_USE_SPI1 FALSE
|
||||
#define STM32_SPI_USE_SPI2 TRUE
|
||||
#define STM32_SPI_USE_SPI3 FALSE
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI3_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ST driver system settings.
|
||||
*/
|
||||
#define STM32_ST_IRQ_PRIORITY 8
|
||||
#define STM32_ST_USE_TIMER 2
|
||||
|
||||
/*
|
||||
* UART driver system settings.
|
||||
*/
|
||||
#define STM32_UART_USE_USART1 FALSE
|
||||
#define STM32_UART_USE_USART2 FALSE
|
||||
#define STM32_UART_USE_USART3 FALSE
|
||||
#define STM32_UART_USART1_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART2_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART3_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART1_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART2_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART3_DMA_PRIORITY 0
|
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* USB driver system settings.
|
||||
*/
|
||||
#define STM32_USB_USE_USB1 TRUE
|
||||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
|
||||
#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
|
||||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
|
||||
|
||||
/*
|
||||
* WDG driver system settings.
|
||||
*/
|
||||
#define STM32_WDG_USE_IWDG FALSE
|
||||
|
||||
#endif /* MCUCONF_H */
|
||||
+5
-2
@@ -1,9 +1,12 @@
|
||||
# Proton C MCU settings for converting AVR projects
|
||||
MCU = STM32F303
|
||||
TARGET := $(TARGET)_proton_c
|
||||
MCU := STM32F303
|
||||
BOARD := QMK_PROTON_C
|
||||
OPT_DEFS += -DCONVERT_TO_PROTON_C
|
||||
|
||||
# These are defaults based on what has been implemented for ARM boards
|
||||
AUDIO_ENABLE = yes
|
||||
WS2812_DRIVER = bitbang
|
||||
|
||||
# Force task driven PWM until ARM can provide automatic configuration
|
||||
BACKLIGHT_DRIVER = software
|
||||
BACKLIGHT_DRIVER = software
|
||||
@@ -14,7 +14,7 @@
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#include "hal.h"
|
||||
#include <hal.h>
|
||||
|
||||
// Value to place in RTC backup register 10 for persistent bootloader mode
|
||||
#define RTC_BOOTLOADER_FLAG 0x424C
|
||||
|
||||
@@ -0,0 +1,209 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef _MCUCONF_H_
|
||||
#define _MCUCONF_H_
|
||||
|
||||
#define STM32F103_MCUCONF
|
||||
|
||||
/*
|
||||
* STM32F103 drivers configuration.
|
||||
* The following settings override the default settings present in
|
||||
* the various device driver implementation headers.
|
||||
* Note that the settings for each driver only have effect if the whole
|
||||
* driver is enabled in halconf.h.
|
||||
*
|
||||
* IRQ priorities:
|
||||
* 15...0 Lowest...Highest.
|
||||
*
|
||||
* DMA priorities:
|
||||
* 0...3 Lowest...Highest.
|
||||
*/
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_NO_INIT FALSE
|
||||
#define STM32_HSI_ENABLED TRUE
|
||||
#define STM32_LSI_ENABLED FALSE
|
||||
#define STM32_HSE_ENABLED TRUE
|
||||
#define STM32_LSE_ENABLED FALSE
|
||||
#define STM32_SW STM32_SW_PLL
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSE
|
||||
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
|
||||
#define STM32_PLLMUL_VALUE 9
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_PPRE1 STM32_PPRE1_DIV2
|
||||
#define STM32_PPRE2 STM32_PPRE2_DIV2
|
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4
|
||||
#define STM32_USB_CLOCK_REQUIRED TRUE
|
||||
#define STM32_USBPRE STM32_USBPRE_DIV1P5
|
||||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
|
||||
#define STM32_RTCSEL STM32_RTCSEL_HSEDIV
|
||||
#define STM32_PVD_ENABLE FALSE
|
||||
#define STM32_PLS STM32_PLS_LEV0
|
||||
|
||||
/*
|
||||
* ADC driver system settings.
|
||||
*/
|
||||
#define STM32_ADC_USE_ADC1 FALSE
|
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
||||
#define STM32_ADC_ADC1_IRQ_PRIORITY 6
|
||||
|
||||
/*
|
||||
* CAN driver system settings.
|
||||
*/
|
||||
#define STM32_CAN_USE_CAN1 FALSE
|
||||
#define STM32_CAN_CAN1_IRQ_PRIORITY 11
|
||||
|
||||
/*
|
||||
* EXT driver system settings.
|
||||
*/
|
||||
#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
|
||||
|
||||
/*
|
||||
* GPT driver system settings.
|
||||
*/
|
||||
#define STM32_GPT_USE_TIM1 FALSE
|
||||
#define STM32_GPT_USE_TIM2 FALSE
|
||||
#define STM32_GPT_USE_TIM3 FALSE
|
||||
#define STM32_GPT_USE_TIM4 FALSE
|
||||
#define STM32_GPT_USE_TIM5 FALSE
|
||||
#define STM32_GPT_USE_TIM8 FALSE
|
||||
#define STM32_GPT_TIM1_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM2_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM3_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM4_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM5_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM8_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* I2C driver system settings.
|
||||
*/
|
||||
#define STM32_I2C_USE_I2C1 FALSE
|
||||
#define STM32_I2C_USE_I2C2 FALSE
|
||||
#define STM32_I2C_BUSY_TIMEOUT 50
|
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 3
|
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 3
|
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ICU driver system settings.
|
||||
*/
|
||||
#define STM32_ICU_USE_TIM1 FALSE
|
||||
#define STM32_ICU_USE_TIM2 FALSE
|
||||
#define STM32_ICU_USE_TIM3 FALSE
|
||||
#define STM32_ICU_USE_TIM4 FALSE
|
||||
#define STM32_ICU_USE_TIM5 FALSE
|
||||
#define STM32_ICU_USE_TIM8 FALSE
|
||||
#define STM32_ICU_TIM1_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM2_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM3_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM4_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM5_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM8_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define STM32_PWM_USE_ADVANCED FALSE
|
||||
#define STM32_PWM_USE_TIM1 FALSE
|
||||
#define STM32_PWM_USE_TIM2 FALSE
|
||||
#define STM32_PWM_USE_TIM3 FALSE
|
||||
#define STM32_PWM_USE_TIM4 FALSE
|
||||
#define STM32_PWM_USE_TIM5 FALSE
|
||||
#define STM32_PWM_USE_TIM8 FALSE
|
||||
#define STM32_PWM_TIM1_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM2_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM3_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM4_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM5_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM8_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* RTC driver system settings.
|
||||
*/
|
||||
#define STM32_RTC_IRQ_PRIORITY 15
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#define STM32_SERIAL_USE_USART1 FALSE
|
||||
#define STM32_SERIAL_USE_USART2 FALSE
|
||||
#define STM32_SERIAL_USE_USART3 FALSE
|
||||
#define STM32_SERIAL_USE_UART4 FALSE
|
||||
#define STM32_SERIAL_USE_UART5 FALSE
|
||||
#define STM32_SERIAL_USART1_PRIORITY 12
|
||||
#define STM32_SERIAL_USART2_PRIORITY 12
|
||||
#define STM32_SERIAL_USART3_PRIORITY 12
|
||||
#define STM32_SERIAL_UART4_PRIORITY 12
|
||||
#define STM32_SERIAL_UART5_PRIORITY 12
|
||||
|
||||
/*
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#define STM32_SPI_USE_SPI1 FALSE
|
||||
#define STM32_SPI_USE_SPI2 TRUE
|
||||
#define STM32_SPI_USE_SPI3 FALSE
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI3_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ST driver system settings.
|
||||
*/
|
||||
#define STM32_ST_IRQ_PRIORITY 8
|
||||
#define STM32_ST_USE_TIMER 2
|
||||
|
||||
/*
|
||||
* UART driver system settings.
|
||||
*/
|
||||
#define STM32_UART_USE_USART1 FALSE
|
||||
#define STM32_UART_USE_USART2 FALSE
|
||||
#define STM32_UART_USE_USART3 FALSE
|
||||
#define STM32_UART_USART1_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART2_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART3_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART1_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART2_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART3_DMA_PRIORITY 0
|
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* USB driver system settings.
|
||||
*/
|
||||
#define STM32_USB_USE_USB1 TRUE
|
||||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
|
||||
#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
|
||||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
|
||||
|
||||
#endif /* _MCUCONF_H_ */
|
||||
+82
-40
@@ -29,7 +29,7 @@
|
||||
#define CHCONF_H
|
||||
|
||||
#define _CHIBIOS_RT_CONF_
|
||||
#define _CHIBIOS_RT_CONF_VER_6_0_
|
||||
#define _CHIBIOS_RT_CONF_VER_6_1_
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
@@ -52,7 +52,7 @@
|
||||
* setting also defines the system tick time unit.
|
||||
*/
|
||||
#if !defined(CH_CFG_ST_FREQUENCY)
|
||||
#define CH_CFG_ST_FREQUENCY 10000
|
||||
#define CH_CFG_ST_FREQUENCY 100000
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -108,21 +108,6 @@
|
||||
#define CH_CFG_TIME_QUANTUM 0
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Managed RAM size.
|
||||
* @details Size of the RAM area to be managed by the OS. If set to zero
|
||||
* then the whole available RAM is used. The core memory is made
|
||||
* available to the heap allocator and/or can be used directly through
|
||||
* the simplified core memory allocator.
|
||||
*
|
||||
* @note In order to let the OS manage the whole RAM the linker script must
|
||||
* provide the @p __heap_base__ and @p __heap_end__ symbols.
|
||||
* @note Requires @p CH_CFG_USE_MEMCORE.
|
||||
*/
|
||||
#if !defined(CH_CFG_MEMCORE_SIZE)
|
||||
#define CH_CFG_MEMCORE_SIZE 0
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Idle thread automatic spawn suppression.
|
||||
* @details When this option is activated the function @p chSysInit()
|
||||
@@ -172,7 +157,7 @@
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_TM)
|
||||
#define CH_CFG_USE_TM TRUE
|
||||
#define CH_CFG_USE_TM FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -182,7 +167,7 @@
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_REGISTRY)
|
||||
#define CH_CFG_USE_REGISTRY TRUE
|
||||
#define CH_CFG_USE_REGISTRY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -193,7 +178,7 @@
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_WAITEXIT)
|
||||
#define CH_CFG_USE_WAITEXIT TRUE
|
||||
#define CH_CFG_USE_WAITEXIT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -250,7 +235,7 @@
|
||||
* @note Requires @p CH_CFG_USE_MUTEXES.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_CONDVARS)
|
||||
#define CH_CFG_USE_CONDVARS TRUE
|
||||
#define CH_CFG_USE_CONDVARS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -295,7 +280,7 @@
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MESSAGES)
|
||||
#define CH_CFG_USE_MESSAGES TRUE
|
||||
#define CH_CFG_USE_MESSAGES FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -311,6 +296,28 @@
|
||||
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Dynamic Threads APIs.
|
||||
* @details If enabled then the dynamic threads creation APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_WAITEXIT.
|
||||
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_DYNAMIC)
|
||||
#define CH_CFG_USE_DYNAMIC FALSE
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name OSLIB options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Mailboxes APIs.
|
||||
* @details If enabled then the asynchronous messages (mailboxes) APIs are
|
||||
@@ -320,7 +327,7 @@
|
||||
* @note Requires @p CH_CFG_USE_SEMAPHORES.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MAILBOXES)
|
||||
#define CH_CFG_USE_MAILBOXES TRUE
|
||||
#define CH_CFG_USE_MAILBOXES FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -334,6 +341,21 @@
|
||||
#define CH_CFG_USE_MEMCORE TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Managed RAM size.
|
||||
* @details Size of the RAM area to be managed by the OS. If set to zero
|
||||
* then the whole available RAM is used. The core memory is made
|
||||
* available to the heap allocator and/or can be used directly through
|
||||
* the simplified core memory allocator.
|
||||
*
|
||||
* @note In order to let the OS manage the whole RAM the linker script must
|
||||
* provide the @p __heap_base__ and @p __heap_end__ symbols.
|
||||
* @note Requires @p CH_CFG_USE_MEMCORE.
|
||||
*/
|
||||
#if !defined(CH_CFG_MEMCORE_SIZE)
|
||||
#define CH_CFG_MEMCORE_SIZE 0
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Heap Allocator APIs.
|
||||
* @details If enabled then the memory heap allocator APIs are included
|
||||
@@ -345,7 +367,7 @@
|
||||
* @note Mutexes are recommended.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_HEAP)
|
||||
#define CH_CFG_USE_HEAP TRUE
|
||||
#define CH_CFG_USE_HEAP FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -356,7 +378,7 @@
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_MEMPOOLS)
|
||||
#define CH_CFG_USE_MEMPOOLS TRUE
|
||||
#define CH_CFG_USE_MEMPOOLS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -367,7 +389,7 @@
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_OBJ_FIFOS)
|
||||
#define CH_CFG_USE_OBJ_FIFOS TRUE
|
||||
#define CH_CFG_USE_OBJ_FIFOS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -378,20 +400,40 @@
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_PIPES)
|
||||
#define CH_CFG_USE_PIPES TRUE
|
||||
#define CH_CFG_USE_PIPES FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Dynamic Threads APIs.
|
||||
* @details If enabled then the dynamic threads creation APIs are included
|
||||
* @brief Objects Caches APIs.
|
||||
* @details If enabled then the objects caches APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_WAITEXIT.
|
||||
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_DYNAMIC)
|
||||
#define CH_CFG_USE_DYNAMIC TRUE
|
||||
#if !defined(CH_CFG_USE_OBJ_CACHES)
|
||||
#define CH_CFG_USE_OBJ_CACHES FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Delegate threads APIs.
|
||||
* @details If enabled then the delegate threads APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_DELEGATES)
|
||||
#define CH_CFG_USE_DELEGATES FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Jobs Queues APIs.
|
||||
* @details If enabled then the jobs queues APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_JOBS)
|
||||
#define CH_CFG_USE_JOBS FALSE
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
@@ -411,7 +453,7 @@
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#if !defined(CH_CFG_USE_FACTORY)
|
||||
#define CH_CFG_USE_FACTORY TRUE
|
||||
#define CH_CFG_USE_FACTORY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -427,42 +469,42 @@
|
||||
* @brief Enables the registry of generic objects.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
|
||||
#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
|
||||
#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables factory for generic buffers.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
|
||||
#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
|
||||
#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables factory for semaphores.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_SEMAPHORES)
|
||||
#define CH_CFG_FACTORY_SEMAPHORES TRUE
|
||||
#define CH_CFG_FACTORY_SEMAPHORES FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables factory for mailboxes.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_MAILBOXES)
|
||||
#define CH_CFG_FACTORY_MAILBOXES TRUE
|
||||
#define CH_CFG_FACTORY_MAILBOXES FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables factory for objects FIFOs.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
|
||||
#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
|
||||
#define CH_CFG_FACTORY_OBJ_FIFOS FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables factory for Pipes.
|
||||
*/
|
||||
#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
|
||||
#define CH_CFG_FACTORY_PIPES TRUE
|
||||
#define CH_CFG_FACTORY_PIPES FALSE
|
||||
#endif
|
||||
|
||||
/** @} */
|
||||
+10
-4
@@ -29,9 +29,9 @@
|
||||
#define HALCONF_H
|
||||
|
||||
#define _CHIBIOS_HAL_CONF_
|
||||
#define _CHIBIOS_HAL_CONF_VER_7_0_
|
||||
#define _CHIBIOS_HAL_CONF_VER_7_1_
|
||||
|
||||
#include "mcuconf.h"
|
||||
#include <mcuconf.h>
|
||||
|
||||
/**
|
||||
* @brief Enables the PAL subsystem.
|
||||
@@ -68,6 +68,13 @@
|
||||
#define HAL_USE_DAC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the EFlash subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_EFL) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_EFL FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the GPT subsystem.
|
||||
*/
|
||||
@@ -420,7 +427,7 @@
|
||||
* buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_USB_BUFFERS_SIZE 256
|
||||
#define SERIAL_USB_BUFFERS_SIZE 1
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -451,7 +458,6 @@
|
||||
#define SPI_USE_CIRCULAR FALSE
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
@@ -15,6 +15,6 @@
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include_next "board.h"
|
||||
#include_next <board.h>
|
||||
|
||||
// #undef STM32_HSE_BYPASS
|
||||
|
||||
@@ -17,4 +17,4 @@
|
||||
|
||||
// #define CH_CFG_OPTIMIZE_SPEED TRUE
|
||||
|
||||
#include_next "chconf.h"
|
||||
#include_next <chconf.h>
|
||||
|
||||
@@ -17,4 +17,4 @@
|
||||
|
||||
// #define HAL_USE_DAC TRUE
|
||||
|
||||
#include_next "halconf.h"
|
||||
#include_next <halconf.h>
|
||||
|
||||
@@ -15,7 +15,7 @@
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include_next "mcuconf.h"
|
||||
#include_next <mcuconf.h>
|
||||
|
||||
// #undef STM32_HSE_ENABLED
|
||||
// #define STM32_HSE_ENABLED FALSE
|
||||
|
||||
Reference in New Issue
Block a user